Exploring the: Recycled Materials Zone
|
Sort by: |
- RPET Prices Come Full Circle
- WEB EXCLUSIVE: RPET prices in the first quarter fluctuated but mostly ended up where they started.
Article Published: 3/29/2013
- Pallets, Pellets Use Old Tires as Feedstock
- Custom injection and compression molder CTC Plastics, Dayton, Ohio, recently rolled out a line of pallets and will be supplying the resin compounds used to make them as well.
Article Published: 12/28/2012
- Low Prices Won’t Last
- 2012 brought lower prices across the board to buyers of recycled materials.
Article Published: 12/27/2012
- R-PET Pricing Stable for Now
- WEB EXCLUSIVE: Recycled PET orders are starting to pick up, and prices are beginning to stabilize.
Article Published: 10/1/2012
- MGP Bioplastics Launches High-Heat Biodegradable Resin
- The Bioplastics Div.of MGP Ingredients, Inc., Atchinson, Kan., has expanded its portfolio of Terratek renewable-content plastics with a new line of biodegradable compounds.
Article Published: 10/1/2012
- Recycled Plastics Prices Unstable In First Half of 2012
- WEB EXCLUSIVE: Recycled plastic prices are plummeting as virgin materials’ prices slide lower and lower.
Article Published: 6/27/2012
- MATERIALS AT NPE: All Market Sectors Benefit from Large Crop of New Materials
- Higher-performance and easier processing PE film resins for packaging, a one-pass crosslinked PE for photovoltaic (PV) wire and cable, several higher-performing nylons and TPEs, “greener” plastics, and enhanced styrenic and PC resins are...
Article Published: 4/28/2012
- RPET Prices Follow Oil and Virgin Resin Prices Upwards
- RPET prices were sliding lower at the end of 2011, but they began the climb back up by mid-January.
Article Published: 3/28/2012
- Materials & Additives at NPE: Performance, Processability, And Sustainability
- Bioplastics take center stage.
Article Published: 2/23/2012
- Sustainability: It Will Change Your Business...If It Hasn't Already
- Do you have a sustainability officer yet? You might need one. It's probably even more likely that your customers have one, and you will have to pay attention to them if you want to continue to supply them with plastic parts or products.
Article Published: 12/28/2011
