Exploring the: Recycling & Scrap Reclamation Zone



« Prev | | Next »

Sort by:


FDA Gives OK to Novel RPET Extrusion System
German equipment supplier Gneuss (U.S. office in Matthews, N.C.) last month received an unrestricted non-objection letter from the U.S.
Article Published: 4/25/2011
Extrusion Vet Guthrie Supplies Recycling Equipment
Long-time extrusion industry executive Sandy Guthrie has started his own recycling equipment company.
Article Published: 4/25/2011
Recycled PET Pricing Is Unsettled
WEB EXCLUSIVE: On the East Coast, RPET prices continue to climb, although somewhat slower than they have been.
Article Published: 4/4/2011
Recycled Resin Prices Still Rising in First Quarter
2010 was recovery year for many reprocessors.
Article Published: 1/10/2011
K 2010 Preview, Auxiliaries: Equipment of All Types Debuts This Month at K 2010
From materials drying, feeding, and blending to process heating/cooling, scrap reclaiming, testing, welding, and decorating—the K 2010 show this month in Dusseldorf, Germany, will have news in all categories of auxiliary equipment.
Article Published: 1/3/2011
Lots of Action in Plastics Recycling
Several projects in recent months will increase capacity for recycled plastics.
Article Published: 12/30/2010
EXTRUSION & COMPOUNDING: Five-Layer Film Structures Set to Supplant Three Layers?
In blown film, equipment and material suppliers have come together to push five-layer technology into non-barrier applications previously held by three-layer films.
Article Published: 12/23/2010
Recycling & Scrap Reclaim at NPE 2003
Most of the news to be found at NPE in post-consumer recycling comes from Europe and concerns direct recycling of PET flake into sheet without repelletizing.
Article Published: 6/7/2010
Recycling Conference Shows Off New Ways To Enhance Recycled Plastics
News from the recent SPE Global Plastics Environmental Conference in Detroit includes lots of technological “firsts.” Among them: electronic “noses” to sniff out chemical contaminants in reclaim; long-fiber molded parts made with auto shredder waste...
Article Published: 6/7/2010
Entrepreneur Puts Mixed-Polymer Recycling On Track to Success
Polywood Inc. in Edison, N.J., uses mixed recycled plastics to make fiber-reinforced structural profiles for railroad ties, I-beams, and decks.
Article Published: 6/7/2010

« Prev | | Next »


Bunting Magnetics
Maguire
PTOnline
Copyright © Gardner Business Media, Inc. 2014 All rights reserved.