Exploring the: Sheet Extrusion Zone



« Prev | | Next »

Sort by:


EXTRUSION: Is Head Pressure Sapping Your Extruder’s Strength?
A redesign of all of the flow paths between the end of the barrel and die may be in order.
Columns Published: 8/24/2016
EXTRUSION: Orientation: The Good and the Bad
Depending on what you are trying to accomplish, molecular orientation can have a positive or negative impact on your part. Here’s how to control it.
Columns Published: 7/29/2016
Food Packaging Should Remain Strong
But industrial markets could slip.
Columns Published: 6/22/2016
Save the Date for Second Annual Extrusion Conference
Plastics Technology’s Extrusion 2016 Conference will be held Dec. 6-8 in Charlotte, N.C.
Columns Published: 3/22/2016
Are You Ready to Take on the World?
Plastics Technology’s exclusive benchmarking study reveals the tactics of processors who just might be in that class.
Columns Published: 12/21/2015
Don’t Waste Any More Time: Register Now for the Extrusion 2015 Conference
Don’t miss out on the technical event of the year in extrusion.
Columns Published: 9/25/2015
The Extrusion 2015 Conference: Open for Business
Registration is now open for a new conference that hits on all extrusion technologies. Go online and sign up: Nov. 2-3, Charlotte, N.C.
Columns Published: 7/21/2015
EXTRUSION: How to Adjust for Shrinkage and Orientation
Polymers shrink and orient. Sometimes orientation is unbalanced, resulting in misshaped parts. But there are steps beyond tweaking the die that can mitigate these effects.
Columns Published: 7/16/2015
Are You a ‘World-Class’ Processor?
Participate in Plastics Technology’s industry-wide benchmarking survey and you might find out.
Columns Published: 3/31/2015
Get Ready for The Extrusion 2015 Conference
Plastics Technology will hold the first-ever conference next November devoted to all areas of extrusion processing.
Columns Published: 11/24/2014

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2016 Cincinnati, Ohio 45244