Exploring the: Stretch Blow Molding Zone



« Prev | | Next »

Sort by:


Blow a Bottle with Liquid Instead of Air
New technology--to be made widely available--blows and fills bottles in the same step.
Article Published: 8/26/2014
Taiwan Takes Its Place Among Machinery Elite
Overshadowed in geographic size and economic output by its neighbor to the east, Taiwan punches above its plastics weight class and is looking to become more self sufficient in its machinery offerings.
Article Published: 7/18/2014
Two New Blow Molding Tech Centers
Uniloy offers a range of new and expanded services for extrusion blow and injection-blow molders.
Article Published: 6/20/2014
Process Simulation Advances For Stretch-Blow Molding
The challenges in molding simulation multiply along with the process complexity, making injection stretch-blow molding one of the most challenging areas to tackle. But one group is becoming a world leader in modeling ISBM and developing tools and h...
Article Published: 5/21/2014
Blow Molder’s Goal: Go Local on a National Scale
It's a rare feat: Combining three formerly separate blow molders under one umbrella while retaining their individual identities and "small company feel" for customers.
Article Published: 4/23/2014
Carbonated Beverage Bottle Gets Even Lighter
Cutting soft-drink bottle weight another 30-45%.
Article Published: 3/24/2014
Blow Molding News at K 2013
All-electric machines of all types were the stars of the show, but there were a number of other noteworthy developments.
Article Published: 1/24/2014
BLOW MOLDING: Lighter PET Water Bottle Doesn’t Squish
New PET preform and bottle designs are said to create a super-lightweight 0.5-liter bottle for still water that not only weighs 34% less than the average commercial bottle of this size, but also achieves 32% more topload strength than the lightest c...
Article Published: 1/7/2014
Headlines from the K 2013 Show
Here’s just a taste of the innovations on display, a selection of the top headlines not covered in our September show preview.
Article Published: 11/25/2013
New Maker of PET Bottle Machines
Builder of filling and capping machines for dairy products and vegetable oils rounds out product line.
Article Published: 10/25/2013

« Prev | | Next »


Novatec
Copyright © Gardner Business Media, Inc. 2014 All rights reserved.