Exploring the: Stretch Blow Molding Zone



« Prev | | Next »

Sort by:


Blow Molder’s Goal: Go Local on a National Scale
It's a rare feat: Combining three formerly separate blow molders under one umbrella while retaining their individual identities and "small company feel" for customers.
Article Published: 4/23/2014
Carbonated Beverage Bottle Gets Even Lighter
Cutting soft-drink bottle weight another 30-45%.
Article Published: 3/24/2014
Blow Molding News at K 2013
All-electric machines of all types were the stars of the show, but there were a number of other noteworthy developments.
Article Published: 1/24/2014
BLOW MOLDING: Lighter PET Water Bottle Doesn’t Squish
New PET preform and bottle designs are said to create a super-lightweight 0.5-liter bottle for still water that not only weighs 34% less than the average commercial bottle of this size, but also achieves 32% more topload strength than the lightest c...
Article Published: 1/7/2014
Headlines from the K 2013 Show
Here’s just a taste of the innovations on display, a selection of the top headlines not covered in our September show preview.
Article Published: 11/25/2013
New Maker of PET Bottle Machines
Builder of filling and capping machines for dairy products and vegetable oils rounds out product line.
Article Published: 10/25/2013
Blow Molder on a Growth Path
Being in the right place(s) counts in the bottle business—as do having the right product, the right customer service, and the right technology. Alpha Packaging has taken all those principles to heart.
Article Published: 10/24/2013
K 2013 Preview: Blow Molding
Of the six machine builders who were willing to pull back the curtain even a little, five of them said they’d be showcasing all-electric presses. That remarkable fact suggests that all-electric technology, which has been a much harder sell in blow m...
Article Published: 8/28/2013
Optimize Resin Management in Extrusion Blow Molding
In the EBM process, profits depend greatly on how judiciously you use resin.
Article Published: 12/28/2012
Drumroll, Please: How Mauser Rose to Number 1
Drum blow molder Mauser has used acquisitions, home-made machine building and careful attention to processing details to take the leading position in the field.
Article Published: 7/30/2012

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2015 Cincinnati, Ohio 45244