Exploring the: Thermoforming Zone



« Prev | | Next »

Sort by:


‘Back to Basics’ Fuels More Innovation at Thin-Gauge Former
Shift from private to capital ownership give Tray-Pak a boost.
Article Published: 1/28/2012
Sustainability: It Will Change Your Business...If It Hasn't Already
Do you have a sustainability officer yet? You might need one. It's probably even more likely that your customers have one, and you will have to pay attention to them if you want to continue to supply them with plastic parts or products.
Article Published: 12/28/2011
On Site: Evolution of a One-Stop High-Tech Thermoformer
A company that started as a toolmaker has evolved into a thermoforming solutions provider
Article Published: 9/30/2011
Physically Foamed HIPS Is New Factor in Rigid Packaging
Relief for escalating costs of packaging materials and an opportunity to address sustainability goals are two factors that have helped attract global attention to a new physical foaming technology for HIPS packaging.
Article Published: 7/27/2011
'Green'...And Microwaveable Too
New technology from Teknor Apex Co., Pawtucket, R.I., eliminates a property tradeoff that could allow polylactic acid (PLA) to supplant polystyrene and polypropylene for microwavable frozen-food trays, lids for hot beverage cups, and carry-out conta...
Article Published: 7/27/2011
Optimize Plug Shape for Thermoforming
Software will adjust the shape to provide more uniform material thickness in the formed part
Article Published: 6/27/2011
DuPont Honors Packaging Innovators
Sixteen winners honored in 23rd annual awards ceremony.
Article Published: 6/27/2011
New in the U.S. & Growing Fast
One wouldn’t expect a Colombian packaging giant to come to Virginia for a cup of coffee, but that’s sort of what happened.
Article Published: 5/31/2011
Processing Biopolymers for Rigid Sheet & Thermoforming
Newly available cast sheet and thermoforming grades of Mirel biobased polymers open up a new range of applications in containers and other formed parts where renewable content and biodegradability are desired.
Article Published: 5/31/2011
Multi-Layer Injection Molded Tubs Take on Thermoforming & Metal Cans
Kortec Inc., Ipswich, Mass., a supplier of multi-layer injection molding technology, is launching an altogether new system for making rigid barrier containers.
Article Published: 4/25/2011

« Prev | | Next »


PTOnline
Copyright © Gardner Business Media, Inc. 2014 All rights reserved.