Exploring the: Molds & Tooling Zone



« Prev | | Next »

Sort by:


Mold Simulation: Get Best Results With Good Materials Data
Want the best results from your flow analysis software? Of course you do. But you stand a better chance for success if you pay particular attention to the material data used by the software.
Article Published: 1/23/2014
Husky Buys Another Moldmaker
Husky Injection Molding Systems recently acquired Schöttli Group in Switzerland, a moldmaker specializing in medical and closure molds.
Article Published: 12/30/2013
AGS: A Molding Business Built on Recycling
AGS Technology Inc. in Schaumburg, Ill., was started in 1995 with a simple concept: to be the low-cost custom injection molder of automotive parts by using recycled plastics formulated to exacting quality standards.
Article Published: 11/25/2013
Rapid Tooling Enables ‘Quick Manufacturing’
Custom molder Harbec explores new and unconventional methods of moldmaking to provide a competitive edge for its $15 million molding business.
Article Published: 10/24/2013
K 2013 Preview: Injection Molding
Next month’s mammoth triennial plastics show in Düsseldorf, Germany, challenges injection molding machine builders to demonstrate technological leadership in addressing the needs of the marketplace.
Article Published: 8/26/2013
‘Reshoring’ Is Not a Myth
For this molder, 35% to 40% of current sales is new business generated in the past two to three years—and some of that is due to reshoring.
Article Published: 7/29/2013
Extreme Molding’s Mantra: ‘Find Your Niche and Stick to It’
For a small custom injection molder competing in today’s global market, Lynn Momrow-Zielinski has two pieces of advice: 1) Develop a business plan and stick to it. 2) Find a technical and/or market niche and stick to that, too.
Article Published: 6/25/2013
Haidlmair Adds Capacity for Extra-Large Molds
Austrian moldmaker expands at home and in the U.S.
Article Published: 6/25/2013
Measuring the Magic Of Turbulent-Flow Mold Cooling
For decades molding experts have talked about the importance of achieving turbulent flow in mold-cooling circuits. But what is it about turbulence that makes it so important? What can be measured and demonstrated to have some tangible value to molde...
Article Published: 5/28/2013
Tooling Advances Highlighted At Molding 2013 Conference
Molds and tooling were a big topic at the Molding 2013 Conference in New Orleans this January.
Article Published: 2/26/2013

« Prev | | Next »


PTOnline
Copyright © Gardner Business Media, Inc. 2014 All rights reserved.