Molds & Tooling

Exploring the: Molds & Tooling Zone

145 Results for: New Product

Sort by:
Published: 9/23/2016

Disposable Cleaning Towels Cut Through Industrial Residue
Slide Products’ Mold & Metal Wipes disposable industrial-strength cleaning towels are formulated to quickly remove tough contaminants, residue and grime from molds and other surfaces.

Published: 9/22/2016

BLOW MOLDING: Injection-Blow Machine With Rotary Platen at K 2016
Injection machine converted to injection-blow.

Published: 9/22/2016

Metal Protection Cuts Cleaning Time, Boosts Machine Efficiency
IMS Co. is a North American distributor of Autosol metal and mold care products, which are designed to reduce cleaning time, protect a variety of metals and allow machine cycles to run more efficiently for longer.

Published: 9/21/2016

INJECTION MOLDING: Multi-Shot In-Mold Assembly Swaps Out TPE for LSR
Special cold-sprue bushing and third LSR-specific injection unit create finished, sealed automotive duct in 55 seconds.

Published: 9/21/2016

Heavy-Duty, Gas-Fired Furnace Used for Heat Treating
Grieve’s No. 1042 is a 2,000°F (1,093°C) gas-fired, heavy-duty furnace currently used for heat treating.

Published: 9/20/2016

Protective Wrap Prevents Metal Corrosion
Boride Engineered Abrasives’ MetalRustGuard was developed to prevent rust and corrosion on any type of metal. It comes in the form of a protective wrap that is self-adhesive, easy to apply, re-usable and requires minimal cleanup after removal.

Published: 9/19/2016

Powder Nozzle Enables Fast Modification of Molds
O.R. Lasertechnologie GmbH has developed an automated powder nozzle for existing laser welding systems that enables use of direct metal deposition (DMD) instead of manual laser cladding for modifying and repairing injection molds and dies.

Published: 8/25/2016

TOOLING: Mold Memory Device at K 2016
16 GB of memory screwed into the mold, with a USB interface.

Published: 8/24/2016

TOOLING: Innovative Spin on Cube Molds At K 2016
Three exihibits for multicolored caps with in-mold closing, foam/solid PET preforms for stretch-blow molding, and for injection-blow molding on a modified injection machine.

Published: 4/14/2016

TOOLING: Faster Cooling Core Pins
Tungsten carbide pins conduct heat like Be Cu but are much stiffer and harder.