NEW PRODUCTS

This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

You are viewing products related to: Hot Runners

PUBLISHED: 1/3/2014

INJECTION MOLDING: More Compact Hydraulics For Hot-Runner Valve Gates

Incoe Corp. introduced HEM miniature hydraulics to actuate valve-gate systems at the recent Euromold 2013 show in Frankfurt, Germany.


PUBLISHED: 10/24/2013

INJECTION MOLDING: New Hot-Runner Technology for PET Preforms

Mold-Masters presents several new hot-runner developments for PET preform molding at Drinktec.


PUBLISHED: 10/24/2013

INJECTION MOLDING: New Hot-Runner Controller, Upgraded Closure & Preform Machines

Husky unveils new member of its Altanium hot-runner controls family, and makes U.S. debut of an enhanced cap-molding system.


PUBLISHED: 9/24/2013

INJECTION MOLDING: New Hot Runners & Auxiliary Injectors at K Show

Mold-Masters, Georgetown, Ont., will display new models in two product lines at K 2013 in Düsseldorf this month.


PUBLISHED: 1/29/2013

INJECTION MOLDING: Low-Cost, High-Performance Hot-Runner Controllers

Plastic Engineering & Technical Services, Inc. (P.E.T.S.), Auburn Hills, Mich., has introduced the PHRS family of hot-runner temperature controllers, said to “provide outstanding performance at price levels far below any competitive offerings.”


PUBLISHED: 2/1/2012

INJECTION MOLDING: Single-Drop Hot Sprue Bushings for Prototyping & Short Runs

New D-Max single-drop hot sprue bushings from DME, Madison Heights, Mich., have two zones of heating with separate thermocouples.


PUBLISHED: 12/28/2011

INJECTION MOLDING: Electric Valve Gate Provides Ultimate Needle Control

Sophisticated hot-runner systems can benefit from the new high-performance electric valve-gate system from Synventive Molding Solutions, Peabody, Mass.


PUBLISHED: 8/23/2011

INJECTION MOLDING: Unitized Hot Runners

DME Co., Madison Heights, Mich., introduced two new unitized hot-runner systems based on its Stellar and Galaxy lines.


PUBLISHED: 7/26/2011

INJECTION MOLDING: Hot Runners for Auto Lighting

Synventive Molding Solutions, Peabody, Mass., has come out with a line of hot-runner systems tailored for automotive lighting such as front and rear lenses.


PUBLISHED: 6/27/2011

INJECTION MOLDING: Smaller Hot-Runner Pitch And Two-Piece Edge Gates

Smallest flat line nozzle allows cavity spacing of 5.5 mm.


RSS RSS  |  Atom Atom