Heating & Cooling

Exploring the: Heating & Cooling Zone

105 Results for: New Product

Sort by:
Published: 5/10/2018

Larger Booth, Closer Proximity to Technology Partners for Burger & Brown
Upgrading to a 50 percent larger booth over NPE2015, Burger & Brown’s bigger space is also adjacent to RJG Inc., which will use that company’s new Tracer units to provide flow and temperature readings to its data acquisition and moni...

Published: 4/23/2018

Injection Molding: New Alternative to Band Heaters For Small Injection Barrels
More durable and efficient barrel heater from a maker of tabletop injection machines.

Published: 3/28/2018

Rapid Heat/Cool Molding with Induction Heating Achieves ‘High Definition’ Mold-Surface Replication
At least three exhibits will show the benefits of rapid heat/cool molding with Roctool’s induction heating.

Published: 3/20/2018

Platform Collects, Transmits and Saves Flow Rate and Temperature Data
Scientific injection molding adherents can use temperature and flow rate data to confirm cooling water condition requirements; new flow regulator automatically adjusts flow rate.

Published: 3/4/2018

Linked-Valve Reimagines Stock Manifold Block Customization
Patent-pending system from Plastixs allow a single lever to simultaneously operate mold cooling supply and return lines. 

Published: 3/2/2018

Portable Chillers Now Capture Energy Data
In addition to energy consumption, the Microgel digital controls allow processors to review temperatures, pressures and flow rates.

Published: 2/27/2018

Connectors Designed With Optimized Flow Properties
All-metal push-in and threaded fittings offer high flow rates. 

Published: 2/23/2018

New Physical Foaming Process for Injection Molding
Linde will introduce a new physical foaming process for injection molding and show off CO2-based gas-assist and mold-cooling technologies.

Published: 2/18/2018

Heating/Cooling: Energy-Saving Mold-Temperature Control Comes to NPE
Electronic flow control is paired with a variable-speed TCU pump to achieve optimum cooling with the minimum energy required. 

Published: 2/18/2018

Injection Molding: Wittmann’s U.S. Debut of Two Machines, New Robots & Auxiliaries at NPE
A high-speed packaging machine, two-shot micromolder, and new high-end and economical robots, plus several new auxiliaries bow in at NPE.