Hot Runners

Exploring the: Hot Runners Zone

89 Results for: Product

Sort by:
Published: 9/24/2013

INJECTION MOLDING: New Hot Runners & Auxiliary Injectors at K Show
Mold-Masters, Georgetown, Ont., will display new models in two product lines at K 2013 in Düsseldorf this month.

Published: 1/29/2013

INJECTION MOLDING: Low-Cost, High-Performance Hot-Runner Controllers
Plastic Engineering & Technical Services, Inc. (P.E.T.S.), Auburn Hills, Mich., has introduced the PHRS family of hot-runner temperature controllers, said to “provide outstanding performance at price levels far below any competitive offerings.”

Published: 2/1/2012

INJECTION MOLDING: Single-Drop Hot Sprue Bushings for Prototyping & Short Runs
New D-Max single-drop hot sprue bushings from DME, Madison Heights, Mich., have two zones of heating with separate thermocouples.

Published: 12/28/2011

INJECTION MOLDING: Electric Valve Gate Provides Ultimate Needle Control
Sophisticated hot-runner systems can benefit from the new high-performance electric valve-gate system from Synventive Molding Solutions, Peabody, Mass.

Published: 8/23/2011

INJECTION MOLDING: Unitized Hot Runners
DME Co., Madison Heights, Mich., introduced two new unitized hot-runner systems based on its Stellar and Galaxy lines.

Published: 7/26/2011

INJECTION MOLDING: Hot Runners for Auto Lighting
Synventive Molding Solutions, Peabody, Mass., has come out with a line of hot-runner systems tailored for automotive lighting such as front and rear lenses.

Published: 6/27/2011

INJECTION MOLDING: Smaller Hot-Runner Pitch And Two-Piece Edge Gates
Smallest flat line nozzle allows cavity spacing of 5.5 mm.

Published: 5/30/2011

INJECTION MOLDING: Hot-Runner Control Boasts Rapid ROI
A new modular controller for hot runners reportedly yields an early return on investment by virtue of its accuracy, durability, and operator-friendliness.

Published: 7/1/2010

Compact Hot-Runner Multi-Nozzle Modules
New compact modules containing multiple hot-runner nozzles are available from Hasco America Inc., Fletcher, N.C.

Published: 5/1/2010

Plug-'N-Play Hot-Runner Systems for Small Parts
Synventive Molding Solutions, Peabody, Mass., has two new hot-runner products: Model 06E threaded/screw-fit nozzle and model PNC30 pneumatic bolt-on actuator for valve gates.