Pipe, Profile & Tubing Extrusion

Exploring the: Pipe, Profile & Tubing Extrusion Zone

142 Results for: Product

Sort by:
Published: 9/24/2013

EXTRUSION: Versatile Counter-Rotating Twin-Screw
At this month’s K 2013 show in Düsseldorf, Milacron will display the TP75, a counter-rotating twin-screw extruder suitable for profile, pipe, and wood-plastic composites.

Published: 5/28/2013

MATERIALS: Adhesive Tie-Layer Resins with Over 95% Renewable Content
WEB EXCLUSIVE: Two new grades of Polybond functionalized polymers used as tie layers in multilayer thermoplastics applications such as pipe have been launched by Addivant, Middlebury, Conn., a new company formed from the Antioxidant and UV Stabilize...

Published: 5/28/2013

EXTRUSION: Small Extruders for Medical Tubing
Designed for medical tubing, the Modular Micro Extruder from American Kuhne, Ashaway, R.I.,provides the versatility to quickly and easily change barrel and screw diameters and feed-section configurations.

Published: 4/29/2013

EXTRUSION: Higher-Pressure Gas Injection For Microcellular Foams
Applicable to extrusion and blow molding operations.

Published: 12/28/2012

AUXILIARIES: Blenders Handle Difficult Scrap
Two new solutions from Conair, Cranberry Township, Pa., are designed for use with its TrueBlend line of blenders to allow feeding thin, flaky regrind without repelletizing.

Published: 10/1/2012

EXTRUSION: Space-Saving Coex Lines For Window Profiles
In response to a trend to use more recycled materials and fillers in window-profile extrusion, new coextrusion systems from KraussMaffei Berstorff, Florence, Ky., are designed with flexibility and space savings in mind.

Published: 8/28/2012

EXTRUSION: Novel Melt Pump Feeds Two Die Heads from One Extruder
The twin-outlet Extrex GPD pump from Maag, Charlotte, N.C., reportedly simplifies pipe and profile coextrusion and foaming applications by allowing processors to use just one extruder to feed two die assemblies.

Published: 7/31/2012

EXTRUSION: Die-Flow Simulation ‘in the Cloud’
Plastic Flow, LLC , Hancock, Mich., has just released a Pay Per Execution (PPX) version of its extrusion die design software, polyXtrue.

Published: 2/21/2012

EXTRUSION: Low-Volume Crosshead Die
Designed for micro-extrusion applications.

Published: 11/22/2011

EXTRUSION: Profile Lines for Auto Seals
A new extrusion line is designed specifically for profiles that combine polypropylene and/or TPEs of different hardnesses.