Thermoforming

Exploring the: Thermoforming Zone

132 Results for: Product

Sort by:
Published: 3/23/2011

AUXILIARIES: New Barrier Coatings for Containers
Cavonic 3D Coating Technologies and InterTech Rx, LLC have combined to bring new barrier coating technology to North American processors of rigid containers.

Published: 6/1/2010

Fast-Cycling Machine for Packaging
New RV 53C vacuum forming machine from Illig, South Hill, Va., offers speeds up to 45 cycles/min, nearly twice as fast as the previous version, and is made for small-to-medium production of packaging for food and other items.

Published: 3/1/2010

Softer Formable Olefin Foams
Thermoformable, closed-cell, crosslinked polyolefin foams up to 70% softer than previous versions are new from Toray Plastics (America), Inc., PEF Div., Front Royal, Va.

Published: 2/1/2010

Softer Formable Olefin Foams for Auto Interiors
WEB EXCLUSIVE: Thermoformable, closed-cell, crosslinked polyolefin foams that are up to 70% softer than previous versions are now available from Toray Plastics (America), Inc., PEF Div., Front Royal, Va.

Published: 1/1/2010

Dedicated Heater Platen Boosts Output, Quality
WEB EXCLUSIVE: GN Thermoforming Equipment, Chester, N.S., has developed a tool-specific heater platen that is said to offer output rate increases up to 30% while improving product clarity and speeding tool changeovers.

Published: 12/1/2009

Cast Acrylic Sheet Comes with Biocide
WEB EXCLUSIVE: Lucite L clear cast acrylic sheet from Lucite International, Memphis, Tenn., is now available with built-in antimicrobial protection for medical applications such as dispensers for facial tissue, gloves, and paper towels.

Published: 10/1/2009

Faster Position Sensors for High-Speed Molding
WEB EXCLUSIVE: Injection molding, thermoforming, and other machines that require high-speed position sensing can benefit from a new faster update option for magnetostrictive Temposonics linear position sensors from MTS Systems Corp.’s Sensors ...

Published: 7/1/2009

New Sheets of TPO and Recycled PETG
WEB EXCLUSIVE Spartech Corp., St.

Published: 7/1/2009

Adding Muscle to an ‘Economy’ Machine
The upgraded Ecoformer KMV 53E in-line vacuum former from Kiefel GmbH in Germany (U.S. office in Hampton, N.H.), has considerably higher forming pressure and slightly larger forming area than its predecessor, model KMV 50.

Published: 7/1/2009

Larger 3- or 4-Station PET Former
The new FFG 920-ADV machine from Amut SpA in Italy (North American office in Woodbridge, Ont.) is the largest so far in Amut’s FFG series of in-line formers, which use “plug-and-play” tooling for complete tool changes in under 30 m...