Molds & Tooling

Exploring the: Molds & Tooling Zone

172 Results for: Product

Sort by:
Published: 12/28/2011

INJECTION MOLDING: Higher Performance Mold Evacuation
CAE Services Corp., Batavia, Ill., has introduced Mold-Vac 20,000, the highest performance model in its line of mold-evacuation systems for injection molding.

Published: 11/22/2011

INJECTION MOLDING: Automated Mold Changer Integrated with Press Controls
Engel Machinery Inc., York, Pa., is offering its first automatic mold-changing system with a controller utilizing the company’s CC 200 press control.

Published: 10/5/2011

TOOLING: Roundness/Cylindricity Measurement
The new Roundtest RA-H5200 Series roundness/cylindricity measurement system from Mitutoyo America Corp, Aurora, Ill. is said to be both accurate and flexible.

Published: 9/29/2011

INJECTION MOLDING: Multicomponent Molding Plus Advanced In-Mold Assembly
An advanced injection system for molding and assembling multiple components in one machine and mold will be demonstrated at the Fakuma show in Germany later this month.

Published: 6/27/2011

INJECTION MOLDING: Smaller Hot-Runner Pitch And Two-Piece Edge Gates
Smallest flat line nozzle allows cavity spacing of 5.5 mm.

Published: 5/31/2011

TOOLING: Rust Preventive Is Food Approved
Reportedly neutralizes fingerprint acids and is self-cleaning and self-healing.

Published: 4/26/2011

TOOLING: New Mold Components at Amerimold Show
A number of new mold components were shown at last month’s Amerimold expo in Rosemont, Ill., sponsored by Gardner Publications, publisher of Plastics Technology and Moldmaking Technology magazines.

Published: 4/26/2011

TOOLING: Corrosion-Resistant Aluminum for Molds
Alpase Inc., Downey, Calif., is now offering M-5 aluminum mold plate using standard 5000 series aluminum alloy.

Published: 5/1/2010

Plug-'N-Play Hot-Runner Systems for Small Parts
Synventive Molding Solutions, Peabody, Mass., has two new hot-runner products: Model 06E threaded/screw-fit nozzle and model PNC30 pneumatic bolt-on actuator for valve gates.

Published: 4/1/2010

Ruse Preventive Won't Mark Molded Parts
A new rust preventive from Slide Products, Wheeling, Ill., delivers a dry mist that does not penetrate into moving mold components like ejector pins holes, slides, and cams.