Molds & Tooling

Exploring the: Molds & Tooling Zone

176 Results for: Product

Sort by:
Published: 4/26/2011

TOOLING: New Mold Components at Amerimold Show
A number of new mold components were shown at last month’s Amerimold expo in Rosemont, Ill., sponsored by Gardner Publications, publisher of Plastics Technology and Moldmaking Technology magazines.

Published: 4/26/2011

TOOLING: Corrosion-Resistant Aluminum for Molds
Alpase Inc., Downey, Calif., is now offering M-5 aluminum mold plate using standard 5000 series aluminum alloy.

Published: 5/1/2010

Plug-'N-Play Hot-Runner Systems for Small Parts
Synventive Molding Solutions, Peabody, Mass., has two new hot-runner products: Model 06E threaded/screw-fit nozzle and model PNC30 pneumatic bolt-on actuator for valve gates.

Published: 4/1/2010

Ruse Preventive Won't Mark Molded Parts
A new rust preventive from Slide Products, Wheeling, Ill., delivers a dry mist that does not penetrate into moving mold components like ejector pins holes, slides, and cams.

Published: 3/1/2010

Fast Hot-Runner Controller
A new hot-runner temperature controller for 2 to 128 zones boasts very fast scanning and fuzzy logic for accuracy to 0.1° C without overshooting.

Published: 2/1/2010

Lots of Hot-Runner News
WEB EXCLUSIVE: Several suppliers of hot-runner nozzles and controls have come out with new or enhanced products in the last few months.

Published: 2/1/2010

Store All Your Mold Data Right on the Mold
WEB EXCLUSIVE: RedE Vault is a USB flash drive with a “virtually indestructible” and a screw fastener to allow it to be attached to a mold base.

Published: 1/1/2010

Two-Piece Edge-Gate Nozzles Are More Versatile
WEB EXCLUSIVE: Star-Line edge-gate nozzles with one to eight tips now come in a two-piece design with a body and crown.

Published: 12/1/2009

Molds for PET Preforms
WEB EXCLUSIVE: In November, we incorrectly reported that Mold-Masters Ltd., Georgetown, Ont., had introduced at the NPE show complete hot halves for PET preforms with up to six drops.

Published: 8/1/2009

Mold Maintenance Training Center Opens in Ohio
One of the industry’s “best kept secrets” was the opening in March of the ToolingDocs Maintenance Center in Ashland, Ohio, says Steve Johnson, operations manager.