Davis-Standard Ships First Large Accumulator-Head Machine from Fulton Plant
Largest machine yet built in this facility.
Davis-Standard, LLC, Pawcatuck, Conn., recently shipped its first 75-lb accumulator-head blow molding machine from its new blow molding machinery plant in Fulton, N.Y. This is the largest blow molding machine yet built in this facility, which opened last October. The press has a clear platen area of 60 x 96 in. and 250-ton clamp to enable production of large flat panels, drums, and outdoor recreational equipment. “We have built machines larger than this one before, but this is the first of its size to come out of Fulton,” says Mark Panaro, D-S product manager for blow molding. The machine has a rollout clamp to facilitate mold installation and a remote-access feature on the controller that enables viewing of operations via an internet connection.
Related Content
-
How Was K 2022 for Blow Molding?
Over a dozen companies emphasized sustainability with use of foam and recycle, lightweighting and energy savings, along with new capabilities in controls, automation and quick changeovers.
-
50 Years of Headlines … Almost
I was lucky to get an early look at many of the past half-century’s exciting developments in plastics. Here’s a selection.
-
At NPE, Cypet to Show Latest Achievements in Large PET Containers
Maker of one-stage ISBM machines will show off new sizes and styles of handled and stackable PET containers, including novel interlocking products.