Graham, Conair Team Up To Boost Medical Tubing Technology
Suppliers to house each other's equipment in their respective extrusion labs.
%20Conair%20MedLine%20Puller-Cutter.jpg)
%20American%20Kuhne%2012mm%20Modular%20Micro%20Extruder.jpg)
Graham Engineering Corp., York. Pa. and The Conair Group, Cranberry Township, Pa., have agreed on an exchange of equipment that will be used in each company’s extrusion laboratory for development and innovation of technology for medical tubing
Graham will provide a 1-in. American Kuhne Ultra CR extruder with AKcess touchscreen to Conair’s laboratory in Pinconning, Mich. Conair will supply its latest MedVac vacuum sizing/cooling tank, a MedLine puller-cutter, and a MedLine take-away conveyor to be installed in the new, dedicated medical laboratory in Graham’s 150,000 ft2 headquarters and factory in York.
“Conair and American Kuhne have a long history of partnering on extrusion applications, not only on equipment, but also on expertise in process optimization, which is vital to the development and testing work taking place in our new medical laboratory in York,” states Steve Maxson, Graham’s director of global business development–medical. “Conair has been on the forefront of efforts to solve complex medical extrusion challenges such as non-contact and contact vacuum-sizing techniques for small bore medical tubing and cutter blade and bushing designs to effectively cut low-durometer, difficult-to-feed, small-bore tubing.”
Maxson said the new medical laboratory will be working on developments including next-generation medical solutions for bioresorbable tubing for stent scaffolds, multi-layer structures for minimally invasive devices and for the delivery of drugs, gradient tubing, and continued development of the company’s proprietary automatic die-centering technology.
In Conair’s Michigan process-development center, the new American Kuhne extruder will expand the complement of production-scale extrusion equipment installed, according to Bob Bessemer, sales manager, Medical Downstream Extrusion. “This new extruder will expand our capabilities. It is specially equipped to allow us to process FEP (fluorinated ethylene propylene), which is increasingly being used in tubing for critical medical applications,” he notes.
The extruder can also handle high-temperature materials like PEEK (polyether ether ketone) and other medical grade thermoplastics including polyamides and polyurethane.
Related Content
-
Why Compression Ratio is Important
Compression ratios have been pretty much standardized over the years, based on what has typically worked before. But there are quite a few variables that must be considered in order to get the optimum performance from your screw.
-
How to Estimate and Control Head Pressure
You rightfully worry about melt temperature, but don’t overlook head pressure, because the two are closely linked and will influence line performance.
-
Cooling the Feed Throat and Screw: How Much Water Do You Need?
It’s one of the biggest quandaries in extrusion, as there is little or nothing published to give operators some guidance. So let’s try to shed some light on this trial-and-error process.
