• PT Youtube
  • PT Facebook
  • PT Linkedin
  • PT Twitter
7/13/2018

Sytrama Plans U.S. Robot Assembly At New Michigan Plant

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Sytrama moves closer to automotive customers and plans U.S. robot assembly.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
At last month’s Plast 2018 show in Milan, Italy, representatives of Sytrama told Plastics Technology that the maker of injection molding robots would move its U.S. headquarters from New Castle, Del. (sharing space with sister company Negri Bossi), to Canton, Mich., largely to be closer to automotive customers. What’s more, Sytrama plans to begin U.S. assembly of robots at the new 32,300-ft2 facility, which it plans to occupy by the end of this year or early in 2019.
Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Plastics survey from Plastics Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Natural Fibers: The New Fashion In Automotive Plastics

    Lightweight, strong, and low-cost, natural fibers are poised to replace glass and mineral fillers in numerous interior parts.

  • Radiation Crosslinking Boosts Nylon Properties

    Demand for more robust plastics is creating new opportunities for radiation-crosslinked nylons, including nylon 6 and 66, which can serve as cost-effective alternatives to higher-cost, high-heat thermoplastics. Crosslinked nylons have higher heat resistance than their standard counterparts, along with better physical properties and abrasion resistance. Adapted from a paper presented at SPE ANTEC 2012.

  • Commingled Plastic Waste: New Gold Mine for Automotive Processors

    Instead of going to landfills, previously unusable mixed waste like auto shredder residue is yielding a new trove of inexpensive engineering resins for car parts. Sortation technologies derived from the mining industry can pull out usable ABS, PC, acrylic, PP, TPO, and PPO alloys.


Related Topics

Resources