• PT Youtube
  • PT Facebook
  • PT Linkedin
  • PT Twitter
9/9/2015 | 1 MINUTE READ

Are You A Pipe, Profile or Tubing Processor? The Extrusion 2015 Conference

Originally titled 'Are You A Pipe, Profile or Tubing Processor? There’s Plenty to Learn at the Extrusion 2015 Conference'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

  Have you checked out Plastics Technology’s upcoming Extrusion 2015 Conference?



Have you checked out Plastics Technology’s upcoming Extrusion 2015 Conference? It’s going to be held Nov. 2-3 in Charlotte, N.C. at the Omni Charlotte Hotel in the downtown section of the city.


This two-day event is packed with presentations from more than 60 technical experts covering a wide range of subject areas. The format is a little different than what you might be accustomed to: The morning sessions on each day will include presentations on general extrusion topics. During each afternoon there will be three concurrent breakout sessions that hone in on your particular process: film/sheet; pipe/profile/tubing; and compounding.


If you extrude pipe, profile or tubing, during these two afternoon sessions you’ll have the opportunity to learn more about best practices in quick changeovers, drying, downstream systems for sizing, pulling and cutting, and even “direct” extrusion technology that combines compounding with pipe processing.


But don’t sleep in because there is plenty on the agenda each morning for you: screw design basics, troubleshooting conveying systems, new developments in filtration and melt pump technologies, foaming, how to make more efficient use of reclaim, new approaches in foaming, and more.


In addition to the technical program, there will be ample opportunity for you to mingle with the more than 30 companies who will be exhibiting at this event.


Click here to download a copy of the entire program. Click here to see a list of all of the companies that are exhibiting. Best to act before Oct. 1 to save $100. We also have special pricing if your company is thinking of sending more than three people. Ready to register?


In terms of accommodations, once again it’s best to act quickly. The Omni is the show hotel, but is filling up at a fast and furious pace. As a result, we have negotiated a similar discounted rate with the Aloft Charlotte, which is nearby.


We at Plastics Technology believe the Extrusion 2015 Conference is the event of the year for extrusion processors of all kinds. We hope to see you there.