• PT Youtube
  • PT Facebook
  • PT Linkedin
  • PT Twitter
7/26/2018 | 1 MINUTE READ

Do You Process Sheet? Then Check out the Extrusion 2018 Conference

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Leading sheet-extrusion experts present processing tips, die design guidelines, troubleshooting, info on running heat-sensitive polymers, advances in controls and more. 

There is still time to register for Plastics Technology’s first-of-its-kind extrusion conference. The entire agenda has been finalized, and you can find it and all other relevant details about  the event by clicking on Extrusion 2018 Conference.

It’s going to be held Sept. 18-20 at the Huntington Convention Center in Cleveland. It’s our first Extrusion Conference in Cleveland, following three successful events in Charlotte.

A two-and-a-half-day event, Plastics Technology’s Extrusion 2018 Conference is packed with presentations from 70+ technical experts covering a wide range of subject areas. The program is divided into General Extrusion sessions, which feature presentations that are relevant to all extrusion processors regardless of what comes out of the die; and concurrent track sessions that hone in on your particular process: film; sheet; pipe/profile/tubing; and compounding.

If you’re involved in sheet, you’ll be able to sit in on papers discussing processing tips, die design, troubleshooting, how to run heat-sensitive polymers, advances in controls, and lots more.

In addition to the technical program, there will be ample opportunity for you to network with the more than 80 companies on the supply side who will be exhibiting at this event in what we believe is an unprecedented opportunity for anyone involved in extrusion.

Don’t be confused by imitators. This is the preeminent gathering of extrusion professionals worldwide. And the numbers back that claim up: The Extrusion 2015 Conference attracted about 350 attendees, Extrusion 2016 Conference had an audience of around 400; and Extrusion 2017 drew in about 450.

Click on this page to begin the registration process. Register by August 16 and save $100 off the full conference registration fee of $895.

We at Plastics Technology believe the Extrusion 2018 Conference is the event of the year for extrusion processors of all kinds. We hope to see you there.

RELATED CONTENT


Related Topics