Fungi Makes Meal of Polypropylene
University of Sydney researchers identify two strains of fungi that can biodegrade hard to recycle plastics like PP.
Ongoing research into a variety of technologies for biodegradation of hard to recycle plastics is among the various avenues being taken by the industry and academia in their efforts to address plastic waste and the circular economy. Recently, two common strains of fungi were used to successfully biodegrade polypropylene in a laboratory experiment led by researchers at Australia’s University of Sydney, School of Chemical & Biomolecular Engineering. On the scary side, some science fiction film lovers might recall Michel Chrichton’s 1968 The Andromeda Strain and the 1971 film of the same name which fictitiously describe a microbe Phantom F-4. This biological agent recovered from a satellite and subsequently mutated degrades and destroys rubber-like materials in the aircraft including the pilot's oxygen mask, and eventually the pilot as well.
The U. of Sydney researchers focused on polypropylene due to its high volume focused on PP due to its high volume use in such a broad variety of applications ranging from packaging, toys and other consumer goods to furnishings and automotive. They noted that PP ‘has long been recycling’s head scratching riddle’, and also that PP reportedly accounts for roughly 28% of the world's plastic waste, but only 1% of it is recycled currently. They attributed PP’s infrequent recycling to its short life as a packaging material and because it often becomes contaminated by other materials and plastics, necessitating new recycling methods that have minimal environmental impact.
Overseeing the study, professor Ali Abbas from the School of Chemical & Molecular Engineering and chief circular engineer at Circular Australia said, “Despite the massive scale of plastic production and consumption, there has been very little attention paid to plastics degradation under environmental conditions, and our understanding of how plastics can be degraded is limited. One big question our result has raised is – what are the naturally occurring conditions which can fast track the degradation of plastics? We seek to further explore the role of biological processes offered by fungi and other microorganisms.”
Typically found in soil and plants, the study found that two strains of fungi Aspergillus terreus and Engyodontium album were able to break down PP after it had been pre-treated with either UV light or heat, reducing the plastic by 21% over 30 days of incubation, and by 25%-27% over 90 days.
The researchers hope their method could one day reduce the vast amount of plastic polluting the environment and lead to a greater understanding of how plastic pollution might biodegrade naturally under certain conditions. Said PhD student Amira Farzana Samat and the study’s lead author, “Polypropylene is a common plastic used to make a huge variety of everyday products like food containers, coat hangers and cling film, but it only has a recycling rate of only one percent, meaning it is overrepresented in plastic waste and pollution globally.”
According to co-author of the study professor Dee Carter, an expert in mycology – the study of fungi – in the university’s School of Life & Environmental Sciences, fungi are exceptionally versatile and are known to be able to break down pretty much all substrates. Carter attributes this ‘superpower’ to fungi’s production of powerful enzymes, which are excreted and used to break down substrates into simpler molecules that the fungal cells can then absorb.
Said Carter, “Often, these fungi have evolved to break down woody materials, but this ability can be repurposed to attack other substrates - this is why we find fungi growing on all sorts of man-made materials like carpets, painted furniture, grout around tiles, shower curtains, upholstery and even car headlights. Recent studies suggest some fungi may even degrade some of the ‘forever chemicals’ like PFAS, but the process is slow and not yet well understood. There is also evidence that the amount of plastic accumulated in the ocean is less than what might be expected based on production and disposal levels, and there is speculation that some of this ‘missing’ plastic may have been degraded by marine fungi.”
The Method and What’s Next
Polypropylene in various forms was initially treated with one of three separate methods: UV light, heat, and Fenton’s reagent – an acidic solution of hydrogen peroxide and ferrous iron often used to oxidize contaminants.
In a petri dish, the fungi were applied separately as single cultures to treated PP. The validity of the biodeterioration was then confirmed through microscopy techniques. While the research didn’t evaluate how the plastic was degraded by the fungi or whether it was metabolized, the researchers hope to conduct further research to determine the type of biochemical processes taking place.
Professor Abbas, who believes the low rate of plastics recycling globally presents a 'massive plastics circularity gap’ noted, “We need to support the development of disruptive recycling technologies that improve the circularity of plastics, especially those technologies that are driven by biological processes like in our study. It is important to note that our study did not yet carry out any optimization of the experimental conditions, so there is plenty of room to further reduce this degradation time.”
Related Content
Formulating LLDPE/LDPE Blends For Abuse–Resistant Blown Film
A new study shows how the type and amount of LDPE in blends with LLDPE affect the processing and strength/toughness properties of blown film. Data are shown for both LDPE-rich and LLDPE-rich blends.
Read MoreFundamentals of Polyethylene – Part 6: PE Performance
Don’t assume you know everything there is to know about PE because it’s been around so long. Here is yet another example of how the performance of PE is influenced by molecular weight and density.
Read MoreNew Entrant Heartland Polymers Stepping up as Reliable Supplier
Heartland Polymers’ new Alberta, Canada facility will produce 525 KTA propylene and 525 KTA polypropylene. It is expected to stabilize supply chains across the continent.
Read MoreIn Sustainable Packaging, the Word is ‘Monomaterial’
In both flexible and rigid packaging, the trend is to replace multimaterial laminates, coextrusions and “composites” with single-material structures, usually based on PE or PP. Nonpackaging applications are following suit.
Read MoreRead Next
Lead the Conversation, Change the Conversation
Coverage of single-use plastics can be both misleading and demoralizing. Here are 10 tips for changing the perception of the plastics industry at your company and in your community.
Read MoreHow Polymer Melts in Single-Screw Extruders
Understanding how polymer melts in a single-screw extruder could help you optimize your screw design to eliminate defect-causing solid polymer fragments.
Read MoreAdvanced Recycling: Beyond Pyrolysis
Consumer-product brand owners increasingly see advanced chemical recycling as a necessary complement to mechanical recycling if they are to meet ambitious goals for a circular economy in the next decade. Dozens of technology providers are developing new technologies to overcome the limitations of existing pyrolysis methods and to commercialize various alternative approaches to chemical recycling of plastics.
Read More