Automation: Compact, Lightweight Cobot
ABB introduces a more compact, single-arm version of its double-arm YuMi cobot.
ABB has introduced a single-arm version of its YuMi collaborative robot (“cobot”) to supplement the dual-arm version launched in 2015. The new model IR 14050 is more compact and lightweight (21 lb) and can be mounted in any direction, including ceiling, table and wall mounting. The ultra-light magnesium arm rotates on seven axes for small-parts assembly processes like consumer electronics and other consumer goods. The cobot has a 1.1-lb rated payload capacity and max. reach of 559 mm. Position repeatability is 0.02 mm.
The cobot uses the same intuitive lead-through programming as the dual-arm YuMi. Described as “inherently safe by design,” it reportedly needs no barriers or cages. In addition, ABB’s SafeMove2 package of hardware and software is available as an option. SafeMove2 includes safety functions such as speed limits, safe standstill monitoring, safe axis ranges, and position and orientation supervision. For example, if an operator needs to interact with the cobot, safety sensors can be incorporated into the cell to detect the person’s presence. After detecting a person’s presence, SafeMove will either supervise the robot’s speed or monitor it while it is standing still. Once the person clears the zone, the cobot can resume operation.
Related Content
-
Real-Time Production Monitoring as Automation
As an injection molder, Windmill Plastics sought an economical production monitoring system that could help it keep tabs on its shop floor. It’s now selling the “very focused” digital supervisor it created, automating many formerly manual tasks.
-
Processing Megatrends Drive New Product Developments at NPE2024
It’s all about sustainability and the circular economy, and it will be on display in Orlando across all the major processes. But there will be plenty to see in automation, AI and machine learning as well.
-
A Cost Saving Modular Approach to Resin Drying Automation
Whether implementing a moisture-sensing closed-loop system for a single dryer, or automating an entire plant, technology is available to take the guesswork and worry out of resin drying. Using a modular approach allows processors to start simple and build more capabilities over time.
