Lanxess Adds Two New Production Lines for Composite Material Tepex
Lanxess’ wholly-owned subsidiary Bond-Laminates boosts capacity of Tepex by 50%.
Cologne-based Bond-Laminates GmbH, a wholly-owned subsidiary Lanxess, has added two new production lines for Tepex continuous-fiber-reinforced thermoplastic composites. Says managing director of Bond-laminate Christian Obermann, “We have increased our capacity for manufacturing Tepex by around 50 percent and, in doing so, are responding to the strong demand in the mass production of highly stressable components for lightweight vehicles and consumer electronics,”
To accommodate the expansion from six to eight production lines, a new hall covering around 1,500 square meters was constructed. The total investment ran to the mid single-digit millions and also comprised three cutting machines, including a new four-head waterjet cutting machine for prefabricating component cuts.
Tepex is becoming increasingly popular in the automotive industry for the large-scale production of lightweight structural components such as front end and bumper brackets, brake pedals and underbody paneling components. One recent example involved two electrically adjustable single rear seats for a variant of the Audi A8, whose seat shells are manufactured in a hybrid molding process using the nylon-6-based Tepex dynalite. The seat shells are around 45 percent lighter than a comparable metal version.
Lanxess sees further potential for Tepex to be used in the production of backrests and armrests as well as seat shells for new, highly complex seating concepts in autonomous cars or for comfort seats for shuttle, VIP and family buses. Electric vehicles offer further attractive potential for Tepex. “The spectrum of applications ranges from brackets for front ends, doors and bumpers, luggage compartment recesses, battery housings and brackets for electrical and electronics modules through to structural components in the “greenhouse” section and structural trims in the underbody area to protect the battery,” according to Henrik Plaggenborg, head of Tepex Automotive at Lanxess.
Typical applications of Tepex in consumer electronics include the thin-walled yet exceptionally strong and rigid structural components for cellphones, tablets, laptops and TVs – components that also have to meet strict aesthetic requirements regarding design and haptics. In the sports sector, Tepex is used for example in the manufacture of shoe soles, bicycle components, ski boots, body protectors and helmets.
In the first three parts of this series we focused on those influences that cause molded parts to get smaller. But there are environmental factors that also cause parts to increase in size over time.
Chemistry is seldom as simple as it looks. Polymer chemistry takes the complexity up a notch. Nylon chemistry is about much more than doing the math.
Composite RR ties could finally be on their way to becoming the next big thing in plastic lumber. They are attracting interest from makers of marine pilings, another category of structural wood replacements.