New Control Platform, Plus Lines for Sheet, Tubing
Navigator control system now extends to all of the company's brands, including Graham Engineering, Welex, and American Kuhne.
Graham is displaying a complete American Kuhne extrusion system for medical tubing.
The Welex Evolution extrusion system from Graham targets thin-gauge sheet.
Graham Engineering Corp. is displaying extrusions systems for sheet, medical tubing, wire and cable, and other applications, each equipped with a proprietary Navigator control system for live demonstration of its accuracy and ease of use.
The extrusion displays include:
● A Welex brand Evolution sheet extrusion system—a complete production line for use in sheeting, winding, and in-line thermoforming applications equipped with XSL Navigator control. While the equipment on display is for thin-gauge PP, the Evolution system can be customized for widths from 36 to 90 in. (90 to 230 cm), gauges from 0.008 to 0.125 in. (0.2 to 3.2 mm), and throughputs up to 10,000 lb/hr (4535 kg/hr.). Monolayer or co-extrusion systems are available, with up to nine extruders. In addition to a customized roll stand, the Evolution system can also be equipped with screen changers, melt pumps, mixers, feedblocks, and dies. Additional features of the line on display include a proprietary roll-skewing mechanism for thin-gauge applications while maintaining quick roll change and electric gap adjustment under full hydraulic load without interrupting production.
Originally developed for Graham Engineering extrusion blow molding systems and then adapted for Welex sheet extrusion lines, Navigator controls are now available for American Kuhne extrusion systems such as those for medical tubing, profiles, and wire and cable. There are three levels of functionality: XC100 for stand-alone extruders, XC200 for one or more extruders in simultaneous operation, and XC300 for integrated production lines with the extruder and components such as a puller, water bath, or winder. All three controls are shown installed on American Kuhne extruders.
● A 2.5 in. (63.5 mm) American Kuhne Ultra extruder equipped with XC100 Navigator control and a 3.5 in. (99 mm) extruder with XC200 Navigator control. Building on the proven performance of the Ultra family of extruders, Graham has made improvements designed to make maintenance simple and accessible. Serviceability features include newly designed barrel covers that allow for quick and easy access to barrel heaters and thermocouples and an automotive style wiring harness with quick-change plugs for routing wiring and thermocouples between the electrical cabinet to the barrel heater/cooling zones.
● American Kuhne tri-layer medical tubing line, consisting of modular micro extruders and XC300 Navigator with integrated the TwinCAT Scope View high-speed data-acquisition system.
● American Kuhne AKcent co-extruder. This versatile customized system is available in fixed horizontal versions or units that can be fully tilted from horizontal to vertical. An EZ-Tilt feature makes angular adjustments quick and easy. The control panel is on located on an arm that is mounted to a ground post allowing the panel to swivel around the post for flexible positioning.
Related Content
-
Avoid Four Common Traps In Granulation
Today, more than ever, granulation is an important step in the total production process. Our expert explains a few of the many common traps to avoid when thinking about granulators
-
How to Estimate and Control Head Pressure
You rightfully worry about melt temperature, but don’t overlook head pressure, because the two are closely linked and will influence line performance.
-
Why Compression Ratio is Important
Compression ratios have been pretty much standardized over the years, based on what has typically worked before. But there are quite a few variables that must be considered in order to get the optimum performance from your screw.
