Versatile Stretch-Blow Molder for Wide or Narrow Necks
FlexBlow reheat stretch-blow molder makes bottles with 18-to-110-mm necks and supports quick changeovers.
UAB Terekas of Lithuania is presenting the newest version of its highly versatile FlexBlow RSBM system. The all-electric, two-cavity FlexBlow 2 WM is able to produce both wide-mouth (up to 110 mm) and narrow-neck (18-mm) containers. It can mold up to 73-mm necks in two cavities and wider in one cavity. Bottles from 1.5 to 3 L can be molded at 700 to 750/hr. Changing the bottle format, including molds, neck, and gripper parts, and fine-tuning the machine settings afterwards, takes no longer than 30 min, says FlexBlow marketing manager Gytis Sirvinskas. Changing just the mold requires loosening four bolts and takes only 5 min. FlexBlow is demonstrating live changeover daily of this machine that can mold wide-mouth jars, cosmetic bottles, and large bottles.
A number of upgrades on this model include new control functions such as an integrated operator manual and troubleshooting guide, and reporting of machine production and efficiency statistics for performance tracking. The challenge of automatically loading preforms with a wide range of neck diameters is addressed by a dual preform loading system. Adjustable feeding slides allow loading preforms with very small support rings (down to 0.8 mm), suitable for cosmetics jars. Inversed preforms with a body wider than the neck can also be handled by the feeding system. And both air and water cooling are now available to cool the neck inside the oven.
Another new feature is customized preform grippers made by 3D printing. This allows for very precise detailing for custom designs and permits quick changes, too. One FlexBlow customer ordered grippers for five different neck sizes, so Terekas color-coded the grippers in anodized aluminum.
Related Content
-
Get Color Changes Right In Extrusion Blow Molding
Follow these best practices to minimize loss of time, material and labor during color changes in molding containers from bottles to jerrycans. The authors explore what this means for each step of the process, from raw-material infeed to handling and reprocessing tails and trim.
-
Avoid Four Common Traps In Granulation
Today, more than ever, granulation is an important step in the total production process. Our expert explains a few of the many common traps to avoid when thinking about granulators
-
50 Years of Headlines … Almost
I was lucky to get an early look at many of the past half-century’s exciting developments in plastics. Here’s a selection.
