AM Workshop
Published

Can Manufacturing Simultaneously Add Robots and People?

According to a study released in Germany, the answer is yes.

Share

In addition to quantifiable gains in productivity and quality, automation has consistently proven to increase something else: anxiety. Robotics, thanks in part to the rise of artificial intelligence (AI) have entered into the general public’s and mainstream media’s consciousness with stories that attempt to predict what jobs might become automated, prompting headlines like these:

Given the general tone of the automation discussion lately, you can understand why the headline for a recent press release from International Federation of Robotics (IFR) caught my attention:

So, yeah, consider the source—the IFR certainly has a dog in this fight—but the release concerned a report by the Centre for European Economic Research (ZEW) commissioned on behalf of the German Federal Ministry for Education and Research (BMBF); the latter being presumably interested in an unbiased assessment of the impact robotics have had on the German economy.

Robot density (number of robots/10,000 employees) in Germany in 2017 was 309 units, third highest worldwide. German employment in 2017, meanwhile, registered at 44 million—its highest level since reunification of the country. In the release, Junji Tsuda, IFR’s president, said Germany’s experience with automation applies beyond that country.

“The modernization of production shifts hazardous, unhealthy and monotonous work to the machines. In the vast majority of cases, only certain activities of a job are automated and not the entire spectrum of an employee’s work.”

The ZEW report also noted that if jobs are eliminated due to automation, as 5 percent of employees were replaced within five years, the employment losses were compensated for by new jobs overall. Going forward, ZEW estimates that further automation and digitalization in manufacturing will generate a 1.8% rise in employment by 2021.

Further bolstering its case, the IFR release called out a recently published London School of Economics (LSE) study entitled Robots at Work. Examining the use of industrial robots in 17 developed economies between 1993 and 2007, that study found that over that time, productivity has improved by around 15% due to industrial robots, while the proportion of low-skilled labor dropped and pay increased slightly.

Automation Adoption Accelerates Around the World

In February, IFR released a survey capturing automation levels around the world. Globally, robot density stood at 74 robot units per 10,000 employees, up from 66 units in 2015. Geographically, average robot density in Europe is 99 units, while coming in at 84 in the Americas and 63 in Asia.

Between 2010 and 2016, the average annual growth rate of robot density in Asia was 9 percent, with 7 percent in the Americas and 5 percent in Europe. In Asia, Chinese utilization of robotics is growing in leaps and bounds, jumping from 25 units in 2013 to 68 units in 2016. China’s robot density currently ranks 23rd worldwide, but the government’s goal is to push it into the world’s top 10 most intensively automated nations by 2020.

Robot density in the United States jumped to 189 in 2016, placing the country seventh in global rank. Going forward, robot sales in the United States will continue to increase through 2020, with forecast growth of at least 15 percent on average per year. I suspect that growth in automation will also correlate with in an increase in robot-fear-mongering headlines.
Insert molding automation
Processing additives for Plastics recycling stream
Improved Stainless 420 ESR
Orbetron new for 2024 micro twin screw feeder
Plastics Recycling Latam
Gardner Business Media, Inc.
LKIMM
NPE2024: The Plastics Show
AM Workshop
Registration is on Us
extrusion lines for encapsulant film for solar
Guill - World Leader in Extrusion Tooling

Related Content

SPONSORED

A Cost Saving Modular Approach to Resin Drying Automation

Whether implementing a moisture-sensing closed-loop system for a single dryer, or automating an entire plant, technology is available to take the guesswork and worry out of resin drying. Using a modular approach allows processors to start simple and build more capabilities over time.

Read More
SPONSORED

Five Ways to Increase Productivity for Injection Molders

Faster setups, automation tools and proper training and support can go a long way.

Read More
Automation

Automation Evolution: From Robots to Work Cells, Solo Devices to Integrated Systems

Injection molding automation has progressed from devices to systems, from simplicity to more complex capabilities. The author traces this development through various levels of automation – all still available choices today – and analyzes the costs and capabilities for each level.

Read More

System Offers 'Lights Out' Mold-Channel Cleaning & Diagnostics

New system automatically cleans mold-cooling lines—including conformal channels—removing rust and calcium, among other deposits, while simultaneously testing for leaks, measuring flow rate and applying rust inhibitor.

Read More

Read Next

sustainability

Advanced Recycling: Beyond Pyrolysis

Consumer-product brand owners increasingly see advanced chemical recycling as a necessary complement to mechanical recycling if they are to meet ambitious goals for a circular economy in the next decade. Dozens of technology providers are developing new technologies to overcome the limitations of existing pyrolysis methods and to commercialize various alternative approaches to chemical recycling of plastics.

Read More
Extrusion Know How

Troubleshooting Screw and Barrel Wear in Extrusion

Extruder screws and barrels will wear over time. If you are seeing a  reduction in specific rate and higher discharge temperatures, wear is the likely culprit.   

Read More
sustainability

Lead the Conversation, Change the Conversation

Coverage of single-use plastics can be both misleading and demoralizing. Here are 10 tips for changing the perception of the plastics industry at your company and in your community.

Read More
Guill - World Leader in Extrusion Tooling