• PT Youtube
  • PT Facebook
  • PT Linkedin
  • PT Twitter
12/29/2014

INJECTION MOLDING: Pre-Engineered Hot Runners for Economy, Fast Delivery

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Standard manifold systems in a wide range of configurations.

Related Suppliers

Designed for molders who want basic but high-quality, North American-made systems, MHS-Mold Hotrunner Solutions, Georgetown, Ont., is launching pre-engineered, economically priced manifold systems for quick delivery. These Quick-Start systems come in a wide range of standard configurations that utilize the same components as the company’s custom-engineered Rheo-Pro systems—like front-removable nozzle heaters. An online catalog is available. Quick-Start will be shown at NPE2015 in March in Orlando, Fla.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Plastics survey from Plastics Technology in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • The New Dimension in Mold Simulation

    Keep an eye on the increasing prominence of so-called “3D” mold analysis. Two vendors of simulation software from Europe and Asia think it’s the best solution for a big proportion of injection molded parts. Established U.S. suppliers aren’t so sure. In any case, the capabilities of both 3D and standard 2.5D simulation are expanding rapidly.

  • Get Control Of Flow in the Mold

    A novel technology allows injection molders to alter the flow pattern inside the cavity and balance the filling of multiple cavities by means of an external mold adjustment while the tool remains in the press. In this exclusive article, the system's inventor explains how it works.

  • Prevent & Minimize Downtime in Hot Runner Molding

    There are simple explanations for the most common hot-runner problems and equally simple ways to prevent them. One is to take advantage of features often overlooked in today’s hot-runner controls.

Resources