Servo Valve-Gate Helps Auto Parts Weigh Less & Look Great
More uniform and lower pressure makes a thinner, better part.
At the recent grand opening of HRSflow North America in Byron Center, Mich. (see Starting Up), the newest manufacturing location of Italian hot-runner systems maker, the emphasis was on molding larger automotive appearance parts such as lighting, instrument and door panels, fascias, fenders, and spoilers. The company showcased its FLEXflow servo-driven valve-gate system, which offers eight steps of freely programmable valve-pin position, speed, and acceleration. The results are said to be improved cosmetic appearance, elimination of flow “hesitation” lines while permitting reduced clamp force, part weight, and warpage. During the opening event, mineral-filled TPO rear spoilers were molded on the plant’s 1000-ton injection press (used for mold trials) with and without FLEXflow valve-pin control. Results in the accompanying table show the ability to use 20% lower clamp force while achieving 4.5% to 7.3% weight reduction.
Related Content
-
How to Start a Hot-Runner Mold That Has No Tip Insulators
Here's a method to assist with efficient dark-to-light color changes on hot-runner systems that are hot-tipped.
-
Best Methods of Molding Undercuts
Producing plastics parts with undercuts presents distinct challenges for molders.
-
What You Need to Know About Leader Pins and Bushings
There’s a lot more to these humble but essential mold components than you might suspect. Following the author’s tips could save much time, money and frustration.
