• PT Youtube
  • PT Facebook
  • PT Linkedin
  • PT Twitter

TOOLING: Mold Memory Device at K 2016

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

16 GB of memory screwed into the mold, with a USB interface.


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

One of the latest entries from Hasco (U.S. office in Fletcher, N.C.) will be shown at K 2016 in Dusseldorf next month. The A5805 Screw Memory is a 16 GB module with USB interface that is screwed directly into the mold so that it is flush-mounted and protected. It can archive all mold-specific or part-specific data to document the production process. It also can store mold designs, injection parameters, and milling programs.


  • The Eight Stages of Mold Repair

    While the mold was still being disassembled, two “cleaners” began pulling tooling out of plates and putting them into buckets in preparation for a good scrubbing—and I mean a scrubbing.

  • How to Determine Maximum Mold Cycle Counts

    At my first production meeting with my new employer, I was told, “We want you to establish a preventive maintenance program that is based on maximum cycle counts for all our molds.” Then, before I could launch into an explanation of how best to determine maximum cycle counts, I was hit with the follow-up: “So, how many cycles do you think our molds can safely run before we need to clean them?”Leaving my crystal ball at home and unable to get my x-ray vision working, there was no way to answer this question with any real accuracy.

  • Vacuum Venting Keeps Molds Running Longer

    In tough economic times, facing hungry competition here and abroad, molders cannot afford to ignore preventable problems that slow cycles, cost machine downtime and mold maintenance, and waste material on reject parts.


Thanks for considering a subscription to Plastics Technology. We’re sorry to see you go, but if you change your mind, we’d still love to have you as a reader. Just click here.