This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

You are viewing products related to: Hot Runners

PUBLISHED: 6/1/2008

Valve-Gate Nozzles Get Performance Enhancement

Bolt-on High-Performance (BHP) valve-gate nozzles from Herzog AG in Switzerland (represented here by Xaloy Inc., Pulaski, Va.) have been redesigned to improve melt flow 25% while imparting less shear stress to the melt.

PUBLISHED: 5/1/2008

Valve Gate Nozzles Now with Four Drops

Pneumatically controlled valve-gate nozzles from Manner International LP, Norcross, Ga., designed for direct side-gating of tubular parts or applications that require lateral injection, have been extended from a two-drop system to include a four-dro...

PUBLISHED: 5/1/2008

New Thermal and Valve-Gate Nozzles and Controller

A thermal-gate nozzle that’s the smallest in a line designed for hot-half applications, a valve-gate style for single-nozzle applications, and a multi-zone hot-runner temperature controller are all new from Mastip North America, Slinger, Wis.

PUBLISHED: 4/1/2008

Low-Cost Unitized System Available in U.S.

Unitized hot-runner manifold systems, which don’t require assembly before mounting between retainer plates, are a new offering in North America from PSG Plastic Service Group Inc., Stevensville, Mich.

PUBLISHED: 4/1/2008

Hot-Runner Flow Control For Thermal Gates

WEB EXCLUSIVE A new hot-runner flow controller based on pressure rather than temperature was introduced recently by Mold-Masters Ltd., Georgetown, Ont.

PUBLISHED: 4/1/2008

Hot Sprue Bushings For Single Cavities

A new line of externally heated hot sprue bushings and tips made for direct part gating in single cavities comes from DM-E Co., Madison Heights, Mich.

PUBLISHED: 4/1/2008

Hot-Runner Nozzle Upgrades

Value Shot hot-runner nozzles for multicavity applications from Hasco America Inc., Arden, N.C., have been redesigned and upgraded.

PUBLISHED: 3/1/2008

New Direct Gating for Hot Runners

A drop-in hot-runner system for smaller molds and tips for direct gating were introduced at the K 2007 show in Dusseldorf by the German parent of Ewikon HotRunner Systems of America, East Dundee, Ill.

PUBLISHED: 2/1/2008

Multi-Drop Hot Runner For PLA Preforms

A high-cavitation hot-runner system designed specifically for molding bottle preforms of biodegradable polylactide (PLA) resins is offered by Husky Injection Molding Systems Ltd., Bolton, Ont.

PUBLISHED: 2/1/2008

Hot-Runner Nozzles for Small and Cosmetic Parts


RSS RSS  |  Atom Atom