Carl Zeiss Industrial Metrology, LLC

6250 Sycamore Lane North
Maple Grove, MN 55369 US

Connect

Special Message

The entire line of the contour and surface measuring machines feature a modular design. The machines are comprised of a base plate, a column, and a feeder. The systems can be equipped with a contour or roughness stylus-and-arm system, or upgraded later, depending on the measuring task. Furthermore, Y tables, Y driver units or CNC table can be mounted for fully automatic contour and surface measurements, enabling the systems to meet specific customer needs.

A Message from Carl Zeiss Industrial Metrology, LLC

Special Message

O-INSPECT combines the best from measuring technology with the best from optics: it is equipped with a contact and an optical sensor.

Special Message

Metrotomography now quickly and clearly shows the defects in areas where previously either an inspection was not possible, or very time consuming and costly cross sections were the only means of ascertaining the required results.Metrotomography is the fusion of metrology and tomography.

As Seen In Plastics Technology

Zeiss Metrotom computer tomograph

Computed Tomography in the Plastics
Computed tomography is an inspection technology that can be networked and used along the entire process chain.

Culture of innovation at Octex Group

'Engage, Innovate, Evolve': Future-Oriented Culture at Octex Group
Using science, technology, and talent to give high-tech customers unprecedented speed to market.

CT scan injection molded part

How CT Scanning Can Cut Your Product-Development Time
Computed tomography scanning offers molders a wide range of benefits, often saving them hundreds of hours during the processes of mold building, mold tryout, and first- article approval. Here’s what you need to know.

Currier Plastics blow molded containers and injection molded closures.

Two Molders Investing in Medical Market
Currier Plastics and NPI/Medical invest in clean rooms; molding and blow molding machines; testing equipment and more.

One cavity development mold

Moldmaker Branches Out With New Services & Technologies
NyproMold offers new development tooling program and the latest in servo drives, enhanced cooling, and CT scanning.

Auxiliaries AT NPE: New Controls Link Auxiliaries
Industry 4.0—the internet of things—is bringing a new level of connectivity to auxiliary equipment. Here’s a rundown of developments there, along with other news in auxiliaries from the show.

AUXILIARIES AT NPE: More Control, Flexibility, And Efficiency
These are key trends in the many kinds of auxiliary equipment displayed at this month’s show. You’ll also see equipment designed to be virtually ‘foolproof.’

TESTING & MEASUREMENT: Geometry Measurement and Structural Inspection Combined
Combining metrology and tomography allows geometry measurement and interior structure inspection.

TESTING: One Sensor Inspects Roughness and Waviness
New roughness sensor boasts improved measuring productivity, reliable and fully-automatic measuring runs, and a common record of data.

Carl Zeiss IMT Opens West Coast Tech Center
WEB EXCLUSIVE: Carl Zeiss IMT, Maple Grove, Minn., opened its West Coast Tech Center in Irvine, Calif., last month.

Carl Zeiss Metrotom 1500 industrial CT scanner

Industrial CT Scanning Speeds Mold Qualification
Qualifying a mold often can take weeks and involve several costly and time-consuming steps.

Product Categories of Carl Zeiss Industrial Metrology, LLC

Coordinate Measuring Systems
Other Testing/Analysis Equipment
Part/Mold Inspection or Digitizing
Scanning & Metrology Services