AMETEK Arizona Instrument

3375 N Delaware St.
Chandler, AZ 85225 US

Division
Instrumentation & Specialty Controls

Connect

A Message from AMETEK Arizona Instrument

Manufacturers of Computrac® Moisture, Solids & Ash Analyzers

AMETEK Arizona Instrument offers rugged, reliable and easy to use moisture, solids and ash analyzers with comprehensive pre- and post-sale customer service including application development, training, and instrument calibration and repair.

Water-Specific, Reagent-Free Karl Fischer Alternative

The Computrac® Vapor Pro® XL is a water-specific, reagent-free Karl Fischer alternative that delivers accurate, precise measurements as low as 10 parts per million without the use of hazardous chemical reagents, expensive glassware or special expertise.

Rugged, Reliable & Rapid Loss-On-Drying Analyzer

Increased precision, flexibility and quicker test times - the Computrac® MAX® 4000XL provides reliable and accurate results up to 100 times faster than standard reference methods.

Rugged, Reliable & Rapid Loss-On-Drying & Loss-On-Ignition Analyzer

The Computrac® MAX® 5000XL, is equipped with the higher temperature capabilities of a muffle furnace, allowing for easy and repeatable moisture, solids and ash testing from a single sample.

As Seen In Plastics Technology

TESTING: Upgraded Moisture Analyzer
Arizona Instrument's Vapor Pro XL allows for higher testing temperatures and better control.

Savvy Processors Reveal Best Practices on Drying
The processors speak: Here’s how some smart molders and extruders tackle the vexing problem of resin drying.

Lab Investment Pays Off For Major Tube & Profile House
Teel started a testing laboratory in 2010 to support quality assurance and new product development and to troubleshoot manufacturing issues as they arise.

Pellet Moisture Sensors Get ASTM Approval
Pellet moisture analyzers that employ relative-humidity sensing technology are now approved under a new standard adopted by Philadelphia-based ASTM in late 2005.

Computrac MAX 2000XL
The MAX 2000XL, used in research and development, quality control, and industrial process control, measures moisture content as low as 0.005 percent in as few as 3 minutes.

Computrac Vapor Pro
Computrac Vapor Pro moisture analyzers detect moisture levels as low as 10 ppm, or 10 ug, in samples as small as 10 mg.

Product Categories of AMETEK Arizona Instrument

Environmental Monitoring and Analysis
Materials Testing Services
Moisture Analyzers
Other Testing/Analysis Equipment
Titrators

Trade Names

Computrac® MAX® Ash Analyzers
Computrac® MAX® Moisture Analyzers
Computrac® Vapor Pro® MA Analyzers
Jerome® Toxic Gas Analyzers