AMETEK Arizona Instrument

3375 N Delaware St.
Chandler , AZ 85225 US

Division
Instrumentation & Specialty Controls

Connect

<h3><span style="font-family:tahoma,geneva,sans-serif">Manufacturers of Computrac® Moisture, Solids & Ash Analyzers</span></h3>

AMETEK Arizona Instrument offers rugged, reliable and easy to use moisture, solids and ash analyzers with comprehensive pre- and post-sale customer service including application development, training, and instrument calibration and repair. Whether you need a reagent-free Karl Fischer alternative or a rugged loss-on-drying or loss-on-ignition analyzer, there is a Computrac to meet your moisture testing needs!

The Computrac® Vapor Pro® XL is a water-specific, reagent-free Karl Fischer alternative that delivers accurate, precise measurements as low as 10 parts per million without the use of hazardous chemical reagents, expensive glassware or special expertise.  The VPXL features an upgraded heater, which increases the upper limit for testing temperatures to 300°C and makes it ideal for testing high-temperature engineering plastics like PEI and PEEK. It also allows for improved control over testing temperatures. The VPXL is compatible with multiple sizes of sample vials and is equipped with stepped temperature testing capabilities for enhanced method development. The brand new touch screen and intuitive user interface make the Vapor Pro XL the most user-friendly Computrac yet. 

The Computrac® MAX® 4000XL is a rugged and reliable loss-on-drying (LOD) instrument that can test a variety of materials at just the touch of a button, and the Computrac® MAX® 5000XL has the higher temperature capabilities of a muffle furnace, allowing for repeatable moisture, solids and ash testing from a single sample. Contact us online for more information. All Computrac analyzers are durable, reliable and easy to use. Their rugged design allows for accurate and repeatable results whether the instrument is in the lab or on the production floor. Computrac moisture analyzers are used in research and development, quality control, industrial process control applications, and to check dryer efficiency. 

If you have any questions or would like to inquire about our free trial program, please contact us online. Don't forget to mention Plastics Technology Magazine!

A Message from AMETEK Arizona Instrument

<h3><span style="font-family:tahoma,geneva,sans-serif">Water-Specific, Reagent-Free Karl Fischer Alternative</span></h3>

The Computrac® Vapor Pro® XL is a water-specific, reagent-free Karl Fischer alternative that delivers accurate, precise measurements as low as 10 parts per million without the use of hazardous chemical reagents, expensive glassware or special expertise.

<h3><span style="font-family:tahoma,geneva,sans-serif">Rugged, Reliable & Rapid Loss-On-Drying Analyzer</span></h3>

Increased precision, flexibility and quicker test times - the Computrac® MAX® 4000XL provides reliable and accurate results up to 100 times faster than standard reference methods.

<h3><span style="font-family:tahoma,geneva,sans-serif">Rugged, Reliable & Rapid Loss-On-Drying & Loss-On-Ignition Analyzer</span></h3>

The Computrac® MAX® 5000XL, is equipped with the higher temperature capabilities of a muffle furnace, allowing for easy and repeatable moisture, solids and ash testing from a single sample.

As Seen In Plastics Technology

Savvy Processors Reveal Best Practices on Drying
The processors speak: Here’s how some smart molders and extruders tackle the vexing problem of resin drying.

Lab Investment Pays Off For Major Tube & Profile House
Teel started a testing laboratory in 2010 to support quality assurance and new product development and to troubleshoot manufacturing issues as they arise.

Product Categories of AMETEK Arizona Instrument

Environmental Monitoring and Analysis
Materials Testing Services
Moisture Analyzers
Other Testing/Analysis Equipment
Titrators

Trade Names

Computrac® MAX® Ash Analyzers
Computrac® MAX® Moisture Analyzers
Computrac® Vapor Pro® MA Analyzers
Jerome® Toxic Gas Analyzers