Beaumont Technologies, Inc. | AIM Institute
6100 West Ridge Road
Erie , PA 16506 US
A pioneer and world leader of in-mold rheological control technologies, Beaumont Technologies is revolutionizing plastics injection molding. As the inventor of MeltFlipper® and other injection molding technologies, Beaumont offers a broad range of plastics engineering services, including:
-MELTFLIPPER® RHEOLOGICAL CONTROL
-THERMA-FLO® MATERIAL CHARACTERIZATION
-PLASTICS EDUCATION & TRAINING
Beaumont has earned a reputation for challenging accepted standards in plastics flow and mold design as well as hot and cold melt delivery systems. Our approach is to apply critical thinking and engineer science-based solutions that enable our customers to mold faster and more consistently at less cost.
Beaumont’s team of plastics engineers approaches each project by questioning everything to learn how can we help our customers become more efficient and optimize part quality and molding processes to improve the bottom line. Simply stated, our goal is to enable our customers to become world class molders.
As Seen In Plastics Technology
Moving Toward ‘Autonomous Molding’ with a Uniform-Low-Pressure Process
A new low-pressure injection molding process has aroused interest among molders and machine suppliers. In his second article on iMFLUX, the inventor of the process explains how it is evolving to support the overall industry goal of self-correcting molding processes that can compensate for common causes of variation to maintain consistent part quality.
To Succeed in Manufacturing, Focus on Your People First
It’s not easy being a custom injection molder in the NYC metro area. For Natech Plastics, the key is developing employees’ skills and commitment.
Seeking Better Balance in Medical Molding
Medical injection molding demands shot-to-shot consistency of part and process—a fundamentally challenging task in multicavity molding—is there better path to flow balance?
Medical Injection Molding Workshop at Amerimold 2019
If you’re already involved in medical injection molding, or would like to be, a new workshop at Amerimold 2019 is can’t miss.
SPE’s Annual Technical Conference Opens Today
ANTEC starts at 8 a.m. with 550 technical and business papers and more than 60 technical marketing presentations.
Skills Gap Statistics Paint Alarming Picture
Many attendees in Orlando in a couple of weeks, walking the aisles and seeking out new equipment, materials and services will be taking a break from another very important search that consumes them back at their facilities: the search for people.
Beaumont Technologies Makes Key Moves Ahead of NPE2018
Ahead of NPE2018, Beaumont Technologies completes the acquisition of Autodesk’s Moldflow material characterization business and offers new courses. Beaumont's AIM Institute achieves PTE ANSCI Certification.
Video: Workforce Development Panel at Molding 2018
A panel discussion during Molding 2018 centered on ways the plastics industry can collaborate and coordinate on bringing talented new people into its workforce.
Injection Molding: All-Electric Two-Stage Machine Debuts at NPE2018
All-electric Sodick V-Line injection molding press of 100 tons is a first for Plustech.
Injection Molding: No, Backpressure Does NOT Raise Melt Temperature
It’s a classic confusion between cause and effect. Melt temperature rises when screw speed is increased. Check out this data.
Beaumont Tech Buys Material Characterization Business from Autodesk Moldflow
A trainer in mold analysis and supplier of simulation services acquires testing facilities used to obtain materials data needed for accurate simulation.
Tooling at NPE: Valve Gates & Multi-Tips Top the News
There’s no letup in development of sophisticated hot-runner nozzles and controls. Here’s news in these and other tooling products at the show.
American Injection Molding Institute: ‘A New Kind of Plastics Education’
Building 'foundational knowledge' and critical thinking skills.
Beaumont Creates American Injection Molding Institute
Beaumont Technologies , Erie, Penn., is launching an injection molding certification program, hoping to fill the yawning skills gap facing the industry with some very well-known instructors.
A New Look at Evaluating Fill Times For Injection Molding
One of the important process parameters to establish and record for any injection molded part is its injection or fill time. Research research reveals the limitations of popularly taught methods of establishing this critical parameter.
High-Flow PEEK Makes Small, Intricate Pipette Tips
WEB EXCLUSIVE: An unfilled grade of Victrex 90 Series high-flow PEEK from Victrex USA was used to mold small medical pipette tips.
TOOLING AT NPE: Hot Runners & Coinjection Grab Spotlight
Tooling innovations at NPE focused primarily on multi-cavity closure and medical applications, though there was also a substantial emphasis on large automotive and appliance parts.
Brand-New Test Method Relates Material, Mold & Machine
It's the first material characterization method developed specifically for evaluating the injection moldability of a plastic melt.
New Way to Characterize Moldability Of Resins & Part/Tool Designs
Experienced injection molders have long known that a resin’s melt flow index (MFI), measured under very low-shear conditions, provides very little information about how it will process under many orders of magnitude higher shear in an actual mold.
Why Multi-Cavity Molds Fill Unevenly
Balanced filling is critical for making identical parts, achieving high CPKs, holding tight tolerances, and getting “good” data from design of experiments.
Balanced Filling Is Critical for Holding Molding Tolerances
Processors face a multitude of challenges whenever they approach an injection molding machine.