Engel Machinery, Inc.

3740 Board Rd.
York, PA 17406 US

Connect

A Message from Engel Machinery, Inc.

Company Profile

ENGEL manufactures injection molding machinery in nine facilities worldwide, ranging from 30 to 6000 US tons, with a line of all-electric, tie-bar-less, toggle and two-platen machines.

Collaborative Partnerships For Success.

It’s not just about equipment.

Injecting Innovation.

From large automotive parts to intricate teletronic and medical components; from precision optical products to multi-material composites, ENGEL has injection molding solutions that meet the most challenging demands for product quality and production efficiency.

As Seen In Plastics Technology

Covid-19 Test Swab Production Cell Introduced
Cell includes a mold, molding machine and robot with the ability to create 320 test swabs per minute and 460,000 test swabs per day.

EVCO Plastics Gears Up To Mold Coronavirus Test Kits
The firm has added shifts, reassigned people and injection machines—and is buying new ones—in a crash program to mold and assemble COVID-19 test kits.

Engel and Haidlmair Team Up for Reusable Face Mask
As facemasks become required in many parts of the world during a time when traditional supplies of single-use versions are completely tapped, Engel and Haidlmair announced work on a reusable solution.

Engel Ceases Production at Austrian Plants Following Employee Coronavirus Infections
Following the sixth confirmed case of Covid-19 for its employees in Austria, Engel said it was ceasing production at its manufacturing sites in Austria until April 15.

Injection: Updated All-Electric Machine Series Targets Cap Production
Engel has updated its e-cap line of all-electric machines promising more speed and efficiency, including sub 2-sec cycles.

Bigger, Faster, Lower-Cost Robots at K 2019
Three, four, five and six axes; high speed and high payload capacities; low-cost models; and collaborative robots made news at K. There were also QMC systems and AGVs.

K 2019 Report: Auxiliaries Stake Their Claim in the Circular Economy
The theme of sustainable plastics pervaded the exhibits at K 2019,  even those of auxiliary equipment suppliers, where everything from dryers to blenders to hopper loaders was reimagined as part of a circular plastics process.

More Milestones for EVCO Plastics
Custom injection molder is adding floorspace, machine capacity, and contract manufacturing capabilities at multiple plants in the U.S. and Mexico.

Paul Caprio Joins Engel North America
Formerly head of KraussMaffei's North American operations, Caprio will serve as president alongside Engel CEO Mark Sankovitch.

Tenere Shapes Market Niche Where Metal and Plastics Meet
Joining metal and plastics to target some of today’s most dynamic industries, contract manufacturer Tenere reinvented itself—and its customer list—in 2016.

Injection Molding: Faster, Smarter, More Efficient Machines Tackle Sustainable Molding at K 2019
Blazing speed plus shrinking energy consumption supported the “green” theme at the big show. Smarter controls and growing connectivity were another key focus.

Simulation Is Making Injection Machines Smarter
Engel’s simlink will refine offline simulation with results from actual molding and use Engel’s machine data to constrain simulation within the actual machine’s capabilities.

Engel’s new, larger e-temp XL TCU.

Heating/Cooling: Advanced Mold-temperature Control at K 2019 Show
Larger electronic TCU and automatic mold blow-out function debut from Engel.

Engel’s new iQ melt control uses all the available cooling time for plastication.

Injection Molding: Optimize Screw Recovery for Better Melt Quality, Less Wear
Engel’s new iQ melt control extends plastication time as much as possible without lengthening the cycle.

Engel e-temp temperature control unit

Heating/Cooling: Temperature Control Features Larger Pump, Higher Temperatures
Engel expanded its e-temp line of temperature controllers at K 2019 with the XL variant, offerings higher pump capacity and greater heat output.

Engel’s new Technology Center

Who’s Doing Research to Advance the Plastics Industry?
Machinery suppliers are taking the lead in plastics R&D. Engel offers one example.

How does injection molding relate to plastics recycling and reuse? K 2019 will provide some answers.

K 2019 Preview: Injection Molding Goes for the ‘Green’
‘Circular Economy’ joins Industry 4.0 as common themes of injection molding exhibits in Düsseldorf.

Circular Economy will be celebrated by Engel at K 2019.

‘Circular Economy’ Will Be Unifying Theme at K 2019 Show
Even injection machine suppliers like Engel will talk about ways their technology can support recycling.

Engel Schwertberg

Video: Engel Previews Its Plans for K
In a pre-K press event held at its global headquarters in Schwertberg, Austria, injection molding machine and automation supplier Engel gave the plastics trade press a preview of the technology it will display in Düsseldorf.

Engel Chinaplas 2019

Five Straight Years of Record Returns for Engel and a Doubling of Production Space for Wintec in China
The Austrian maker of injection molding machines set a new record for sales in its last fiscal year completed in March—Euro 1.6 billion—while announcing a doubling of manufacturing space for its Wintec line of Chinese-made machines at Chinaplas.

CCP Gransden uses the Engel v-duo machine for R&D as well as commercial production.

Injection Overmolding Widens Horizons For Composites Processor
A specialist in thermoset composites since the 1960s, CCP Gransden is a relative newcomer to thermoplastic composites and to injection molding. Its exploration of organosheet overmolding has opened up new potential.

Product Categories of Engel Machinery, Inc.

Automation/Systems Integration
Custom Machine Builders
Injection Molding Machines
Machinery Rebuilding
Part or Sprue Removal Robots and EOAT
Training Programs in Plastics