iMFLUX Inc.

3550 Symmes Rd.
Hamilton, OH 45015 US

Connect

As Seen In Plastics Technology

iMFLUX Low-Pressure Injection Molding

Moving Toward ‘Autonomous Molding’ with a Uniform-Low-Pressure Process
A new low-pressure injection molding process has aroused interest among molders and machine suppliers. In his second article on iMFLUX, the inventor of the process explains how it is evolving to support the overall industry goal of self-correcting molding processes that can compensate for common causes of variation to maintain consistent part quality.

The iMFLUX low-pressure injection molding process did this.

How to Mold This ‘Impossible’ Part
New low-pressure injection molding process “breaks the rules” and solves difficult molding problems.

How does injection molding relate to plastics recycling and reuse? K 2019 will provide some answers.

K 2019 Preview: Injection Molding Goes for the ‘Green’
‘Circular Economy’ joins Industry 4.0 as common themes of injection molding exhibits in Düsseldorf.

Winners of the Leadership and People’s Choice Awards Announced at Re|focus
UBQ Materials accepts the Leadership in Innovation Award and iMFLUX wins the People's Choice Award.

iMFLUX software integrated into Milacron’s Mosaic machine controller at Fakuma 2018

New Process Eliminates Resin Variations as a Quality Variable
At Molding 2019, learn about the latest enhancements to the iMFLUX low-pressure injection molding process, including Auto Viscosity Adjust to compensate for resin variations.

A dozen Markforged 3D printers for prototypes and short runs at EVCO Plastics.

Full Plate of New Technologies on the Table at EVCO Plastics
A new low-pressure molding process, 3D printing of production parts and prototype tooling, collaborative robots, and process monitoring with automatic QC are all on the menu.

iMFLUX plastics processing engineer demonstrates the iMFLUX low-pressure process integrated with Milacron’s Mosaic press controller.

Headlines from Fakuma 2018
Integrating a special low-pressure process into machine controls; novel shop-floor quality-inspection technology; MES systems from machine and controls vendors; and sophisticated in-mold decorating.

control software and screens for iMFLUX low-pressure molding can now be integrated into Milacron’s Mosaic controller.

Milacron Is First to Integrate iMFLUX into Machine Controller
Integrating iMFLUX low-pressure process into machine controls is a more economical route to faster cycles and improved part quality.  

Milacron Demonstrates iMFLUX Low-Pressure Injection Molding at Fakuma Show
Milacron is first to demonstrate this innovative low-pressure process at a trade show.

iMFLUX Molding versus conventional molding

A New Way to Mold Better Parts Faster and Easier
A new injection molding process ‘breaks all the rules’ by using low, constant pressure to achieve faster cycles and better-quality parts.

Product Categories of iMFLUX Inc.

Pressure Controllers, Monitors