PO Box 1020
Pleasantville , NJ 08232 US
A Message from Jomar Corp.
As Seen In Plastics Technology
Blow Molding: Something for Everyone at K Show
Packaging, industrial, continuous-extrusion, accumulator-head, injection-blow, stretch-blow, EPET, foam, sandwich co-injection—the blow molding news was wide ranging at K 2019.
Blow Molding: Entry-Level Injection-Blow Machine
Jomar’s smallest machine, priced for first-time users, now has greater capacity.
K 2019 Preview: Blow Molding Exhibits Focus on Recycling & PET
Spotty information from blow molding machinery exhibitors indicates that the “Circular Economy” will be a recurrent theme and that PET processing will predominate.
VFD or Servo Drive for Energy-Saving Hydraulics? Why Not Both?
New VFD from Bosch Rexroth at NPE2018 illustrates the merits of VFD versus servo drive for hydraulic pumps.
NPE Wrap-Up: News in Primary Machinery, Part 1
Rounding up details from the Big Show not previously reported in all our other coverage, here’s more news in injection and blow molding, extrusion and compounding. Next month, we’ll conclude with recycling/scrap reclaim, robots, tooling, auxiliary equipment, materials and additives.
News Highlights from NPE2018
Developments in Industry 4.0, multi-layer preform molding, automation, LSR processing, and PP were among the major newsbreakers at May’s show. And one film processor finalized purchases of 13 new lines.
Blow Molding: They Said It Couldn’t Be Done
At the recent NPE2018 show in Orlando, Fla., Jomar Corp., Pleasantville, N.J., may have opened some eyes to the unsuspected capabilities of injection-blow molding.
‘Smart Data’: The Rise of the ‘Dashboards’
For North American plastics processors, NPE2018 offered the broadest exposure yet to the bundle of trends and technologies known as Industry 4.0 or the Industrial Internet of Things (IIOT).
NPE2018 New Technology Focus: All-Electrics Multiply in Blow Molding
All-electric shuttles and injection-blow machines continue to proliferate.
Injection-Blow Molding Line Gets a Technology Makeover
Jomar is adding servo-hydraulic drives and Industry 4.0 capabilities to established workhorse machines.
NPE2018 New Technology Focus: The ‘4.0’ Revolution
Injection and blow molding and robot suppliers are making Industry 4.0 the most prevalent theme of the show.
Blow Molding: Injection-Blow Molder Gets a Speed Boost
Closed-loop hydraulics trim dry-cycle times of Jomar’s mid-size injection-blow molder.
Blow Molding at NPE2018: Blow Molding Systems Run the Full Spectrum at NPE
Machines for every process—shuttle, wheel, reciprocating-screw, accumulator-head, suction-blow, injection-blow, compression blow, and one- or two-stage stretch-blow molding—will be running in Orlando. There will be a host of new models, including electric and servo-hydraulic types.
Injection-Blow Machines with Energy-Saving Servo-Hydraulics
Jomar’s IntelliDrive servo-hydraulic pump brings major energy savings to injection-blow molding.
Blow Molding: New Machines Take on Challenging Shapes
￼From very small to very large, from hotel amenity bottles to automotive jounce bumpers, new and upgraded machines tackle difficult jobs while improving productivity, quality, and energy efficiency.
K 2016 Preview: Blow Molding
Looking for speed and energy efficiency? Take your pick of new all-electric, hybrid, and servo-hydraulic machines.
Blow Molding News at K 2013
All-electric machines of all types were the stars of the show, but there were a number of other noteworthy developments.
K 2010 Preview, Blow Molding New Machines Promise More Output with Less ‘Juice’
Higher throughputs and greater energy efficiency will be two big themes in blow molding at next month’s K 2010 show.
K 2004 News Preview: Blow Molding
One of the most interesting innovations in blow molding at K 2004 will be a top-and-bottom blowing system that is said to double bottle output.
NPE 2000 News Wrap-Up: Blow Molding
The latest introductions in extrusion blow molding focused on faster color changeovers, higher bottle production, and integration with form-and-fill operations.
Blow Molding - Higher Output Vies With Flexibility
The emphasis in blow molding equipment introductions at NPE 2003 is on higher output capability and greater versatility to take on emerging markets.