Kurz Transfer Products LP

3200 Woodpark Blvd.
Charlotte, NC 28206 US

Connect

As Seen In Plastics Technology

iMFLUX plastics processing engineer demonstrates the iMFLUX low-pressure process integrated with Milacron’s Mosaic press controller.

Headlines from Fakuma 2018
Integrating a special low-pressure process into machine controls; novel shop-floor quality-inspection technology; MES systems from machine and controls vendors; and sophisticated in-mold decorating.

10-in. HMI display frame with IMD and IML.

Double IMD + IML Injection Molding To Be Demonstrated at Fakuma
Patented Kurz system, demonstrated by KraussMaffei, allows two independent single-image foils to decorate two mold cavities.

New Ionomer Decorative Effects Using Hot Stamping
DuPont collaboration with Kurz Group leads to golden or metallized effects.

DuPont, Kurz, foil, Surlyn film

DuPont & Kurz Collaboration Yields Golden or Metallized Effects
The development involved a foil that offers excellent adhesion to Surlyn ionomer.

Kurz, Engel and Lanxess Team for Decorated, Overmolded Continuous Fiber Sheet
A process to decorate a hybrid composite/thermoplastic part with a decorative film in one mold was among several new decorating technologies exhibited at K 2016 by The Kurz Group.

Remote machine monitoring status

K 2016 Preview: Injection Molding
Adapting injection molding to the concept of Industry 4.0 is gaining momentum. At this show you’ll see that the interconnected, integrated “factory of the future” is almost here.

DecoJect

Engel Previews K 2016 Introductions
Advances in mold cooling, machine condition monitoring, and in-mold decorating will be key exhibits in Dusseldorf.

undefined

Headlines from the K 2013 Show
Here’s just a taste of the innovations on display, a selection of the top headlines not covered in our September show preview.

undefined

Decorating at K 2013
WEB EXCLUSIVE: Kurz debuts two systems, including a patented finishing process that decorates 3D geometries.

K 2010 Preview, Auxiliaries: Equipment of All Types Debuts This Month at K 2010
From materials drying, feeding, and blending to process heating/cooling, scrap reclaiming, testing, welding, and decorating—the K 2010 show this month in Dusseldorf, Germany, will have news in all categories of auxiliary equipment.

Heat-Transfer Foils for a Brushed-Metal Look
New and improved heat-transfer foils with brushed-metal finish are aimed at automotive and electronics.

Hot stamping synthetic wine corks

NPE 2006 News Wrap-Up: New Materials and Equipment for Decorating In and Out of the Mold
Among the latest developments in decorating and printing at the NPE show in Chicago were digital printers, flexographic printers for bags, and scratch-resistant heat-transfer foils for hot stamping and in-mold decoration (IMD). Also featured was new equipment for laser marking and engraving and an electrostatic charger for in-mold labeling (IML). News in stamping foilsSolidBrush metallic finishes are the latest heat-transfer foils from Kurz Transfer Products.

Direct-drive servo-electric motors

NPE 2006 News Wrap-Up: Injection Molding
Advances in electric drive technology were evident in nearly every injection machine builder’s booth in Chicago.

RFID tagging

What to See at NPE 2006: Decorating, Printing and Finishing
While there is plenty of news at NPE this year in pad, screen, dry-offset, flexo, and inkjet printing, as well as laser marking, hot stamping, heat-transfer decorating, and some less familiar technologies—the real star of the show is summed up in two words: “in-mold.” Responding to excitement in automotive, appliance, and electronics industries, at least 19 companies are showing materials or equipment for in-mold film-insert decorating or labeling (IMD, IML) for injection molding and thermoforming.

NPE News Wrap-Up: Decorating & Painting
The Chicago show presented a whole new way to decorate. There were also plenty of improvements in ink-jet and pad printing, hot stamping, laser marking, and surface treating.

Product Categories of Kurz Transfer Products LP

Decorative Coatings
Heat Transfers (decals)
Hot-stamp Tooling (including Silicone)
Hot-stamping Foils
Hot-stamping Presses, Other Heat-transfer Equipment
In-mold Coating Equipment
In-mold Decorating Films
Labeling Equipment--In-Mold