Macro Engineering & Technology Inc.

199 Traders Blvd. E
Mississauga, ON L4Z 2E5 CA


A Message from Macro Engineering & Technology Inc.

Company Profile

Macro Engineering & Technology Inc. is a global supplier of systems, components and services to the plastic film industry.

Advanced Extrusion Systems

Macro Engineering & Technology Inc. is a leading designer and manufacturer of blown, cast, and bioriented film extrusion and coextrusion systems, including custom winding, coating and web handling equipment.

As Seen In Plastics Technology

Macro Engineering, Raven Industries Partner on New 7-layer Cast Extrusion Line
The line includes the addition of two individual extrusion dies to process low and high viscosity resin types.

Macro Expands Die Refurbishing Capabilities
Process reportedly yields dies 'good as new.'

Know Your Options for Foaming Sheet
Tandem extrusion of PS is still the standard technology, but new materials options and equipment technology are emerging.

As in speed, power, quality, flexibility, layers, and efficiency. Those are the trends across all extrusion processes.

EXTRUSION: ‘Universal’ Winder for Geomembrane, Ag Films
Center-turret type has two winding modes.

EXTRUSION: High-Output Foam PS Sheet Line
Line can produce up to 1500 lb/hr.

BLOWN FILM: Foam Specific Layers In Coex Blown Film
Macro applies technology originally developed for cast to blown film.

EXTRUSION: Process Solid, Foam Film With Same Tooling
New system enhances flexibility of a single line.

Here's A New Way to Produce Bags from Scrap
Macro develops multi-tube process that prevents impurities from leaking layer to layer.

Extrusion: Higher Output Line For PVC Cling Film
Line produces film from 8-16 microns thick for both hand-wrap and machine-wrap applications.

Extrusion/Compounding at K 2013: Having It All
Extrusion processors no longer need to chose among speed, quality, and flexibility, based on exhibits at K 2013.


EXTRUSION: Small-Footprint Coex Film Lines
Macro offers smaller footprint compact line to ease installation, save space.

K 2013 Preview: Extrusion, Compounding, Recycling
Across all extrusion technologies, expect to see new standards in speed, quality, flexibility, and efficiency in both energy and material usage.

New Division Helps Film/Sheet Processors Boost Production
Macro Engineering & Technology Inc., Mississauga, Ont., has launched a new Technology Division dedicated to helping processors improve their film and sheet extrusion operations through a range of consultation and services.

PV Sheet Line Boasts Low Shrinkage
Line produces the encapsulant material used in the assembly of solar modules

Extrusion & Compounding at NPE: Advances Push Efficiency Envelope
Blown film towers may have been scarce, but there was no shortage of new technology aimed at helping to make extrusion processors more profitable.

Foaming Developments Aplenty in Extrusion
At NPE2012, Macro Engineering and Technology, Mississauga, Ont., launched new technology to  extrude foamed films in what it describes as an “environmentally friendly process” that uses inert gas as the foaming agent.

Extrusion & Compounding at NPE: More Output, More Flexibility, Less Energy
There won't be many blown-film lines running, but there is still much in the way of innovation going on in extrusion and compounding.

EXTRUSION & COMPOUNDING: Five-Layer Film Structures Set to Supplant Three Layers?
In blown film, equipment and material suppliers have come together to push five-layer technology into non-barrier applications previously held by three-layer films.

Nine layer

K 2010 Preview, Extrusion More…Layers, Output & Quality
In most segments of extrusion technology, the word at K 2010 is more.

Product Categories of Macro Engineering & Technology Inc.

Air Rings and Internal Bubble Cooling Units
Coextrusion Dies, Feedblocks
Custom Machine Builders
Extrusion Dies
Film Take-off Systems
Single-screw Extruders
Web Winders, Unwinds, Rewinds