Heating and Cooling Process Temperature Control from -20°F to 700°F (-29°C to 371°C)
For 65 years, Mokon has set the standard for high quality heating and cooling temperature control systems in many industries including plastics processing, packaging, converting, composites, food processing, medical/pharmaceutical, chemical processing, rubber, printing, general processing and many more.
Mokon manufactures a complete line of water temperature control systems for process heating requirements up to 380°F (193°C) and heating capacities from 2 kW to 96 kW. Heat transfer oil temperature control systems are available in a range of sizes up to 700°F (371°C), 5 to 120 gpm flow rates and heating capacities up to 144 kW per zone. Mokon's portable chillers, available from ¼-ton up to 60-ton, accommodate the full spectrum of applications. The line is also available in full-range, offering heating and chilling in one system, dual circuit capacity control from 10 to 40 tons, low temperature applications, and modulating design for high-efficiency. Central chiller systems provide continuous centralized process cooling down to 20°F, available with capacities of 30 to 120 tons. Pump tank systems are available from 250 gallons and larger and can be integrated with a Mokon central process water chiller, cooling tower, cold climate cooler or water system. Blown film coolers are also offered as well as power and process control panels.
All Mokon systems can be customized to match your application perfectly. Mokon prides itself on its ability to customize or design systems that address specific customer requirements including: electrical specifications, control capabilities, unique sizes, specific construction materials, increased fluid flow, increased heating capacities, special colors, and much more!
Mokon products are proudly designed and manufactured in the USA!. Mokon is an ISO 9001:2015 and ISO 14001:2015 certified company. Please visit our webiste for more information - www.mokon.com .
A Message from Mokon
As Seen In Plastics Technology
Heating/Cooling: Sanitary Chillers, TCUs For Clean Rooms
Mokon’s new Pura-therm line includes cleanroom-ready chillers, TCUs and combination units.
Delta T Systems joins Mokon and Frigel in offering a combination heating/cooling system of a chiller and TCU in one package.
Heating/Cooling: Process Heating & Cooling in One Unit
All-in-one unit saves space, cost, and energy.
NPE2018 New Technology Focus: Process Cooling
Key themes in chillers at NPE2018 are efficiency, connectivity and transparency.
Auxiliaries AT NPE: New Controls Link Auxiliaries
Industry 4.0—the internet of things—is bringing a new level of connectivity to auxiliary equipment. Here’s a rundown of developments there, along with other news in auxiliaries from the show.
Auxiliaries at NPE: New Solutions from Material Preparation To Post-Mold Operations
There will be an extraordinary range of new auxiliary equipment on display at the show.
Heating & Cooling at NPE 2003
Smaller, more efficient, and environmentally friendly are the themes for new heating/cooling products at NPE.
Six Things You Should Know About New Eco-Friendly Chillers
If you never paid much attention to what kind of refrigerant is circulating inside your plastics chillers, it may be time you did.
Process Cooling Goes for Performance Plus Affordability
At the NPE 2009 show in Chicago, half a dozen exhibitors showed new cooling equipment that emphasized improved performance at about the same or lower cost.
NPE 2009 News Flash
Injection MoldingHybrid Press Has Electric ClampNew injection presses that combine servo-electric and hydraulic movements to achieve high performance with energy efficiency will be discussed by Arburg Inc., Newington, Conn.
New Line of Power and Process Control Panels
Mokon announces the availability of power and process control panels and systems for commercial and industrial applications.
New Line of Blown Film Coolers
Mokon's Blown Film Air Coolers offer an increase in blown film productivity, especially in warmer climates or other environments where ambient air temperatures rise during the summer.
Stainless Steel Hydrotherm Water System
Re-engineered to improve accuracy, reliablity of operation and increase output, the Hydrotherm has the highest quality components and construction materials in the industry.
Newly Redesigned HF-2 Series Heat Transfer Fluid System
Mokon announces the availability of the newly redesigned HF-2 Series Heat Transfer Fluid System, updated with improved performance, energy efficiency and reduced space requirements for large flow and higher heating capacity applications.
C3 Cold Climate Cooler System for Cold Weather Areas
Mokon's new C3 Cold Climate Cooler System offers a cost-effective solution to process cooling in cold weather areas.
NPE 2006 News Wrap-Up: Fluid Temperature Control: Saving on Energy and Maintenance
At NPE in Chicago, chillers and TCUs were put on a lean energy diet and redesigned for greater durability. Suppliers also added features while taking out cost.
What to See at NPE 2006: Heating and Cooling
Most of the news at the show is in fluid-circulating mold-temperature-control systems.
NPE 2006 News Flash
Injection MoldingSimplified Hot Runners Save Time & CostA new lower-cost hot-runner alternative to valve gating is suited to less critical cosmetic applications where users need predictable and reliable gate opening but not sequential gate operation.
NPE Newsfinder: Heating and Cooling
Band-heater developments at the show are focused on high-temperature applications such as “thixomolding” and on prolonging heater life by minimizing leaks.
NPE News Wrap-up - Water & Oil Temperature Control
If you’re the sort of manager that can’t resist checking up on your plant after you go home for the night, now you can click on your web browser and read out mold temperatures right there on your PC.