Sumitomo (SHI) Demag

11792 Alameda Dr.
Strongsville, OH 44149 US

Connect

A Message from Sumitomo (SHI) Demag

Company Profile

Sumitomo (SHI) Demag's worldwide group of companies is dedicated to helping plastics processors compete more effectively in the global market.

Places to Visit Us on the Web

Website: sumitomo-shi-demag.us Facebook: facebook.com/SSDinNA YouTube: youtube.com/SSDinNA Aftersales Services: vandorndemag.com

Five Videos of the New SEEV-A All-Electric Machines

Sumitomo (SHI) Demag's new SEEV-A Platform of advanced all-electric injection molding machines is available in 13 models sizes from 56 to 562 U.S. tons, for shot sizes from a fractional gram to over 75 ounces.

As Seen In Plastics Technology

Decorating, Printing: New Decorating Technologies for Tubes and Injection Molding at K 2019
Digital metallic and multicolor decorating of squeeze tubes, combination hot-stamping and four-color printing machine, and large-area injection molding IMD were some of the news from Kurz at K 2019.

Injection Molding: Faster, Smarter, More Efficient Machines Tackle Sustainable Molding at K 2019
Blazing speed plus shrinking energy consumption supported the “green” theme at the big show. Smarter controls and growing connectivity were another key focus.

Simulation Is Making Injection Machines Smarter
Engel’s simlink will refine offline simulation with results from actual molding and use Engel’s machine data to constrain simulation within the actual machine’s capabilities.

Injection Molding: Artificial Intelligence Predicts Part Quality
AI software “learns” via DOE the influence of process variables on part quality and applies that “learning” to make good/bad part determination in production.

Sumitomo Demag Adds two New Tech Centers
New training and demo centers in Illinois and California will help molders keep up with technical developments as they happen.

Dual-arm Wittmann Battenfeld W818S is one of the newer additions at R&D Plastics.

Molder Adopts ‘Semi-Smart’ Automation
R&D Plastics finds new and more sophisticated ways to use robots.

Next-Generation Technologies Benefit Demand for LCPs
‘5G’ and ‘3D printing’ are key drivers in growing demand for LCPs according to FactMR study.

Hekutip pipette-tip gripper for linear takeout robot.

Injection Molding: New Automation Approach for Medical Pipette Tips
Hekuma’s fast and flexible new-generation system will be demonstrated at K 2019.

How does injection molding relate to plastics recycling and reuse? K 2019 will provide some answers.

K 2019 Preview: Injection Molding Goes for the ‘Green’
‘Circular Economy’ joins Industry 4.0 as common themes of injection molding exhibits in Düsseldorf.

Materials: LCPs Prove to be Material of Choice for Fine-Pitch Electrical Connectors
Two new high-flow, low-warpage LCP formulations from Sumitomo Chemical are key to achieving today’s thinner, smaller, higher-density interconnects.

Sumitomo Demag SE Series all-electric injection molding machines.

Sumitomo Demag Moves & Expands
Georgia HQ doubles in size at new location.

GW Plastics Queretaro toolroom

Filling a Precision Molding Niche in Mexico
Originally opened and dedicated by Mexican President Vicente Fox in 2006, GW Plastics has expanded the business and capabilities of its facility in Querétaro, adapting and evolving along with that country’s thriving injection molding market.

Sepro S5-25 robot has vertical stroke 50% faster than the standard S5-25.

Injection Molding: Faster Robots & Cobots
Sepro introduces S5-25 Speed Cartesian model and Seprobot collaborative solution for standard robots.

One of eight Arburg all-electric machines in a clean room at Plastikos.

Digital Manufacturing: Two Medical Molders Embrace Industry 4.0
‘Digitalization’ and ‘connectivity’ are loaded terms—shorthand for a whole new way of doing business. It can’t be accomplished in one go. But two Midwest molders in the sensitive medical field are already feeling the benefits of their initial steps in that direction.

iMFLUX plastics processing engineer demonstrates the iMFLUX low-pressure process integrated with Milacron’s Mosaic press controller.

Headlines from Fakuma 2018
Integrating a special low-pressure process into machine controls; novel shop-floor quality-inspection technology; MES systems from machine and controls vendors; and sophisticated in-mold decorating.

Sumitomo Demag IntElect S 100-ton injection molding press.

Injection Molding: High-Speed All-Electric Press Line
Designed for packaging with cycle times of 3 to 10 sec.

Manner MoldMIND II module

NPE2018 Tooling: Molds Join the Industry 4.0 Conversation
At NPE2018, multiple companies displayed mold monitors that would allow the tool in an injection molding cell to “talk” to other equipment and remote computers.

Milacron Cincinnati 2250-tons

NPE Wrap-Up: News in Primary Machinery, Part 1
Rounding up details from the Big Show not previously reported in all our other coverage, here’s more news in injection and blow molding, extrusion and compounding. Next month, we’ll conclude with recycling/scrap reclaim, robots, tooling, auxiliary equipment, materials and additives.

Engel molds caps in 2-sec cycles on its e-cap machines

NPE2018 New Technology Focus: Dazzlingly High-Speed Packaging Production
Several machine suppliers are injection molding caps and thin-wall cups in as fast as 2-sec cycles.

Wittmann Battenfeld MicroPower Combimould two-shot machine and mold

NPE2018 New Technology Focus: Micromolding is Big
Micromolding is a growing force in medical, electronics and micromechanical parts.

Sumitomo’s Theme: Productivity + Flexibility + Reliability
Sumitomo Demag aims to demonstrate a combination of speed, flexibility, proprietary technologies, and automation with six machine cells running at NPE2018.

Product Categories of Sumitomo (SHI) Demag

Automation/Systems Integration
Business Services for Plastics (Finance, Insurance, Leasing)
Closed-loop Process Control Systems
Cylinders (plasticating) and Liners
Heaters, Heating Elements
Hydraulic Components and Systems
Hydraulic Oil
Injection Molding Machines
Injection Molding Non-return Valves
Injection Molding Nozzles
Machine Installation Services
Machine Maintenance Services
Machine Monitoring/Alarm Systems
Machinery Rebuilding
Motion or Position Controls
Mounts for Machines
Platens
Pressure Sensors, Transducers
Rebuilt Motors and Drives
Rebuilt Screws or Barrels
Screw Conversion Kits
Screw Tips
Screws (Plasticating)
Sequence Logic Controls
Speed, Drive Controls
Temperature Controllers, Monitors
Timers
Training Programs in Plastics
Used Machinery