Sumitomo (SHI) Demag
410 Horizon Dr.
Suwanee , GA 30024 US
CLICK FOR SE500EV-A-HD ALL-ELECTRIC MOLDING DEMO VIDEO
A Sumitomo Demag SE500EV-A-HD all-electric injection molding machine demonstrates high-precision molding of 31.1-inch long automotive headlamp lens with only 302 tons clamp force. This 236 sq in part would normally be run in a 700 ton machine.
A Message from Sumitomo (SHI) Demag
As Seen In Plastics Technology
Diversified Plastics Installs Six Vertical Injection Molding Machines
The company added all-electric Sumitomo (SHI) Demag, Niigata and Nissei molding machines to its Minnesota facility in support of medical device customers and other manufacturers.
20 Good Things to Come Out of 2020—Part 4
Good news was there if you knew where to look for it—in the pages of Plastics Technology magazine or right here on our website. Here’s a review of headlines you can feel good about.
Lights Out, Pristine Production In
The numbers beggar belief and the business belies description—Medical Components of America has six full-time employees, six injection machines and lights-out production that’s gone five years without shipping a bad part or missing a delivery.
Sumitomo (SHI) Demag Finalizes Move from Strongsville to Cleveland
New site will emphasize aftermarket sales support including spare parts inventory and repair and rebuilding capabilities.
Captive Molder Seeks Bigger Footprint in Custom Business
Pittsfield Plastics Engineering has spruced up its facility and added new technology as it seeks to expand its business beyond its proprietary line of reels and spools.
Decorating, Printing: New Decorating Technologies for Tubes and Injection Molding at K 2019
Digital metallic and multicolor decorating of squeeze tubes, combination hot-stamping and four-color printing machine, and large-area injection molding IMD were some of the news from Kurz at K 2019.
Injection Molding: Faster, Smarter, More Efficient Machines Tackle Sustainable Molding at K 2019
Blazing speed plus shrinking energy consumption supported the “green” theme at the big show. Smarter controls and growing connectivity were another key focus.
Simulation Is Making Injection Machines Smarter
Engel’s simlink will refine offline simulation with results from actual molding and use Engel’s machine data to constrain simulation within the actual machine’s capabilities.
Injection Molding: Artificial Intelligence Predicts Part Quality
AI software “learns” via DOE the influence of process variables on part quality and applies that “learning” to make good/bad part determination in production.
Sumitomo Demag Adds two New Tech Centers
New training and demo centers in Illinois and California will help molders keep up with technical developments as they happen.
Molder Adopts ‘Semi-Smart’ Automation
R&D Plastics finds new and more sophisticated ways to use robots.
Next-Generation Technologies Benefit Demand for LCPs
‘5G’ and ‘3D printing’ are key drivers in growing demand for LCPs according to FactMR study.
Injection Molding: New Automation Approach for Medical Pipette Tips
Hekuma’s fast and flexible new-generation system will be demonstrated at K 2019.
K 2019 Preview: Injection Molding Goes for the ‘Green’
‘Circular Economy’ joins Industry 4.0 as common themes of injection molding exhibits in Düsseldorf.
Materials: LCPs Prove to be Material of Choice for Fine-Pitch Electrical Connectors
Two new high-flow, low-warpage LCP formulations from Sumitomo Chemical are key to achieving today’s thinner, smaller, higher-density interconnects.
Sumitomo Demag Moves & Expands
Georgia HQ doubles in size at new location.
Filling a Precision Molding Niche in Mexico
Originally opened and dedicated by Mexican President Vicente Fox in 2006, GW Plastics has expanded the business and capabilities of its facility in Querétaro, adapting and evolving along with that country’s thriving injection molding market.
Injection Molding: Faster Robots & Cobots
Sepro introduces S5-25 Speed Cartesian model and Seprobot collaborative solution for standard robots.
Digital Manufacturing: Two Medical Molders Embrace Industry 4.0
‘Digitalization’ and ‘connectivity’ are loaded terms—shorthand for a whole new way of doing business. It can’t be accomplished in one go. But two Midwest molders in the sensitive medical field are already feeling the benefits of their initial steps in that direction.
Headlines from Fakuma 2018
Integrating a special low-pressure process into machine controls; novel shop-floor quality-inspection technology; MES systems from machine and controls vendors; and sophisticated in-mold decorating.
Injection Molding: High-Speed All-Electric Press Line
Designed for packaging with cycle times of 3 to 10 sec.