Waldorf Technik, Inc.
501 W State St. Ste. 203
Geneva , IL 60134 US
As Seen In Plastics Technology
Hahn Automation’s New Healthcare Technology Center
Hahn Automation in Germany, parent of Hahn Plastics Automation in Windsor, Conn., has a new technology center for the healthcare sector.
Bigger, Faster, Lower-Cost Robots at K 2019
Three, four, five and six axes; high speed and high payload capacities; low-cost models; and collaborative robots made news at K. There were also QMC systems and AGVs.
Injection Molding: News in Automation at K 2019
Three units of the Hahn Group showed new automation solutions at October’s K 2019 show in Dusseldorf.
Implementing Automation Systems: How to Do It Right
If you’re thinking of putting a complex automation system for high-volume consumables into your plant, consider these tips on making sure both you and your supplier are ready to give it the best chance of success.
Hahn Plastics Automation Opens Connecticut HQ, Reveals Plans for Rethink Sawyer Cobots
Avon, Conn., is new HQ for robotic supplier; will expand capabilities of its new collaborative robots line.
Hahn Group Acquires Cobot Technology of Rethink Robotics
Rethink Robotics has shut down, but its technology has been added to Hahn Plastics Automation.
NPE2018: Robots & Automation Tackle Increasing Complexity
Exhibitors highlighted brute strength, complex automation cells, wireless networking, new controls features, and “collaborative” applications. Automated one-minute mold change was another attraction.
K 2013 Preview: Injection Molding
Next month’s mammoth triennial plastics show in Düsseldorf, Germany, challenges injection molding machine builders to demonstrate technological leadership in addressing the needs of the marketplace.
Understanding Automation for Pipette Molding
While simple looking enough, the pipette can be challenging to process. They generally have to be produced in high volumes without sacrificing quality due to their demanding applications. Automation is key to making this happen.
Robots at NPE: Faster, Stronger, Smarter
Among the many attractions in injection molding exhibits at NPE2012 were more intelligent robots with higher speeds and payload capacities
Injection Molding: Speed, Automation & Integration
Hot buttons at the show will be multi-component molding, in-mold labeling/decorating (IML/IMD), in-mold assembly, medical molding, liquid silicone rubber (LSR), micro-molding, and high-speed packaging.
K 2010- Injection Molding New All-Electrics & Hybrids Balance Performance & Economy
The world’s largest plastics show, coming up next month in Dusseldorf, Germany, provides ample evidence of the growing sway of electric drive technology in injection molding.
NPE News in Injection Molding
If a better machine can help your company beat challenging economic conditions, you’ll probably find it at NPE. And finding it will be easier, thanks to our editors’ efforts to sift out of some 2000 exhibits the most significant news in injection and blow molding, extrusion, compounding, and thermoforming.