Wittmann Battenfeld, Inc.

One Technology Park Dr.
Torrington, CT 06790 US

Connect

A Message from Wittmann Battenfeld, Inc.

Company Profile

With headquarters in Vienna, Austria, WITTMANN BATTENFELD is a global company with 7 production facilities, 31 subsidiaries, and 24 agencies in 52 countries.

Wittmann Battenfeld stands for Innovation, custom-made turnkey solutions in Plastics Processing, from Injection Molding Machines to the complete range of Peripheral Equipment. EVERYTHING FROM A SINGLE SOURCE!

Wittmann Battenfeld USA Open House 2014- Connecting Technologies This is a video following Wittmann Battenfeld's Open House & Innovations Workshop, which was June 5th & 6th, 2014 at their US headquarters in Torrington, CT.

As Seen In Plastics Technology

Industry 4.0: Wittmann Battenfeld Makes OPC UA Compatibility Standard
Citing the impact of the coronavirus on the need to digitize manufacturing, Wittmann Battenfeld announced that effective April 1, newly ordered peripheral equipment complies with OPC UA communication protocols free of charge.

Ohio Molder Joins Statewide Consortium to Combat Covid-19
Pragmatic Manufacturing put its new Wittmann Battenfeld molding cells to work as part of an effort to produce and deliver more than 1 million face shields for front-line health care workers in Ohio in just five weeks.

Wittmann Battenfeld Customers Push Machines into Coronavirus Duty
Wittmann Battenfeld injection molding machines in Italy and Austria are churning out valves for respiratory masks and face shield frames and straps, respectively.

Wittmann Battenfeld USA Cancels Open House and Technical Symposium
Citing Covid-19, the supplier of injection molding machines, automation and auxiliary equipment has canceled the event planned for September 24-25 at its U.S. headquarters in Torrington, Conn.

New Product ID Technologies For Industry, Retail & Recycling
Confirming material composition and manufacturing source, anti-counterfeiting, waste sorting, and retail check-out scanning may all get a boost from new ID technologies.

Wittmann Battenfeld to Remain Operational During Covid-19 Crisis
Initially facing a forced shutdown, Wittmann Battenfeld—and many of the plastics manufacturers it supplies—were deemed essential and allowed to remain open.

Small, Family-Run Vermont Molder Pioneers in ‘Lights-Out’ & Industry 4.0
Going back 37 years, T&M Enterprises dared to push available technology far beyond the risk tolerance of much larger firms.

Coping with Coronavirus: What If You Can’t Get a Tech Service Visit?
‘Social distancing’ for service technicians? Online remote servicing to the rescue!

Betts Retires from Wittmann Battenfeld
Working in plastics for more than 40 years, Tom Betts announced his retirement from Wittmann Battenfeld. 

Bigger, Faster, Lower-Cost Robots at K 2019
Three, four, five and six axes; high speed and high payload capacities; low-cost models; and collaborative robots made news at K. There were also QMC systems and AGVs.

Custom Molder’s Strategic Edge: Top-Class Metrology Services
Molding good parts is not enough. Better and faster metrology services for tool qualification and process validation make the difference for Octex Group.

K 2019 Report: Auxiliaries Stake Their Claim in the Circular Economy
The theme of sustainable plastics pervaded the exhibits at K 2019,  even those of auxiliary equipment suppliers, where everything from dryers to blenders to hopper loaders was reimagined as part of a circular plastics process.

Injection Molding: Nonreturn Valves Get Improved Wear Protection
Wittmann Battenfeld showed upgraded check valves at K 2019.

Wittmann Buys FarragTech
Wittmann gains FrragTech’s dryers and cooling equipment based on compressed air.

Wittmann Battenfeld Deploys iMFLUX Low Constant Pressure Molding at Plastec West
A Wittmann Battenfeld SmartPower 110 machine will be molding a 4-cavity dosing cup using iMFLUX technology in Anaheim at the show (Feb. 11-13).

Injection Molding: Largest Wittmann Robot Yet Handles 100 kg
French molder uses its 3-m demolding stroke and large payload capacity to mold waste bins.

Injection Molding: Faster, Smarter, More Efficient Machines Tackle Sustainable Molding at K 2019
Blazing speed plus shrinking energy consumption supported the “green” theme at the big show. Smarter controls and growing connectivity were another key focus.

Simulation Is Making Injection Machines Smarter
Engel’s simlink will refine offline simulation with results from actual molding and use Engel’s machine data to constrain simulation within the actual machine’s capabilities.

Resin Drying: Centralized Segmented Wheel Dryer
Launched at K 2019, Wittmann Battenfeld’s ATON H1000 battery dryer can handle a dry air volume of 1000 m³/hr, for a drying throughput of 500-600 kg/hr.

PTA Plastics Longmont, Colo.

Data Driven, Employee Owned
Approaching its seventh decade in business, PTA Plastics has shifted its location and remade its customer base since its founding in 1953, but many things have not changed in the intervening years, including an emphasis on people and leading-edge technologies.

Wittmann Battenfeld’s new WX138 servo robot has a rigid X axis.

Injection Molding: New Robots at K 2019
New high-speed, standard, and economical models debut from Wittmann Battenfeld.

Product Categories of Wittmann Battenfeld, Inc.

Assembly Robots and EOAT
Automation/Systems Integration
Bag and Drum Dumpers
Blenders (non-intensive)
Chillers
Conveying Equipment (pneumatic and Mechanical)
Conveyors (parts-handling)
Degating Equipment
Dryers for Resins
Feeders
General Purpose Robots and EOAT
Granulators
Hopper Loaders
Hoppers, Bins, Tanks
Hot-water or Oil-circulating Temperature Controllers
Injection Molding Machines
Knives for Granulators, Pelletizers
Machine Installation Services
Machine Maintenance Services
Metering, Proportioning Equipment
Part or Sprue Removal Robots and EOAT
Parts/Runner Separators
Preheaters for Materials
Saws
Scrap-reclaim Systems
Scrap-reclaim Systems--Sorting/Fractionating Systems
Scrap-reclaim Systems--Washing Systems
Shredders, Guillotines
Silos
Stacking, Packing Equipment
Staking, Inserting Equipment
Temperature Controllers, Monitors
Vacuum Pumps

Trade Names

Drymax
Feedmax
Gravimax
Tempro