4704 Wiseland Ave. SE
Canton , OH 44707 US
As Seen In Plastics Technology
Plastiblow Re-Enters U.S. Market With Advanced All-Electric Machines
A major Italian machinery brand, already well established in Latin America, is back in North America with service and spare parts support and a number of distinctive features on its all-electric blow molders.
Harmonization of Injection Molding Safety—PLASTICS’ Perspective
Stan Glover, U.S. TAG Chairman for the development of the new ISO injection molding machine standard, shares his views on the new global guideline seven years in the making.
New Global Standard Aims to Harmonize Injection Molding Machine Safety
ISO 20430—the first international safety standard for plastics and rubber machinery—was published after more than seven years of collaboration by roughly 40 experts from machine makers, associations, and health and safety organizations hailing from 13 countries.
Injection Molding: Check Ring Resists Corrosive Flame-Retardant Additives
Zeiger Industries’ new nonreturn valve lasts 85 times longer in molding test with nonhalogen flame retardant.
Injection Molding: Faster, Smarter, More Efficient Machines Tackle Sustainable Molding at K 2019
Blazing speed plus shrinking energy consumption supported the “green” theme at the big show. Smarter controls and growing connectivity were another key focus.
Resin-Specific Injection Screws & LSR Conversion Kit
Zeiger Industries shows a Plug-n-Play LSR conversion kit and screws designed and built of special materials for specific engineering resins, especially reinforced grades.
Automotive LED Optic Parts Run on LSR Plug-n-Play Conversion Kit
Zeiger uses Dowsil liquid silicone rubber and a Milacron-FANUC Roboshot to mold high-performance LED automotive parts.
Zeiger Industries Welcomes Third Generation to the Business
Taylor Zeiger retires her mitt for job with industry leading firm her grandparents founded
Study Finds Jam Bars Redundant: U.S. and European IM Suppliers Move Closer Towards Harmonization
Ruled redundant, could jam bars be going the way of plungers on new injection molding machines sold into the U.S.?
Injection Molding at K 2013: Doing More with Less
More productivity with less energy consumption and capital investment; more operations in the machine or manufacturing cell with less time, labor, energy, and capital—these were the common themes of injection molding exhibits at October’s K 2013 show.