Barrier Blow Molding

Exploring the: Barrier Blow Molding Zone

104 Results for: Article

Sort by:
Published: 12/1/2005

Headlines for the Next 50 Years
Ever wonder what it would be like to get tomorrow’s newspaper today? After reviewing the most important technical developments of the past 50 years in our October issue, we asked industry experts to help us imagine the biggest headlines in plastics ...

Published: 10/1/2005

50 Ideas That Changed Plastics
Very few readers of this issue can remember, or even imagine, what it was like when an injection molding machine did not have a screw, but only a smooth-bore plunger.

Published: 8/1/2005

Barrier Bottle Technologies Square Off
With single-serve containers raising shelf-life demands, packagers are seeking the barrier with the best cost-performance for PET bottles. Multilayer seems to have the upper hand, but monolayer, coating, and oxygen-scavenger technologies have all wo...

Published: 4/1/2005

Exotic Bottle Shapes Push the Limit
It takes some nerve and a lot of know-how to be on the cutting edge of blow molding today.

Published: 1/1/2005

K 2004 Wrap-Up on Blow Molding: Outputs Keep Rising For PET, OPP, HDPE
Among the more unusual blow molding developments at K 2004 was a closed-loop control system that monitors and corrects material distribution in PET containers as they are produced.

Published: 1/1/2005

Computer Simulation Gives Blow Molder an Edge
Spotting trouble before it starts is ingrained in the company culture at fuel-tank maker Vitec LLC.

Published: 11/1/2004

Simulation Spots Trouble Before It Starts
Blow molding has been one of the slowest processing sectors to adopt simulation software as a design and troubleshooting tool.

Published: 8/31/2004

K 2004 News Preview: Blow Molding
One of the most interesting innovations in blow molding at K 2004 will be a top-and-bottom blowing system that is said to double bottle output.

Published: 7/1/2004

Flambeau Finds the Right Balance of Custom & Proprietary Molding
Flambeau Corp.'s most famous product is the Duncan yo-yo.

Published: 6/1/2004

Plastic-Metal Hybrids Are Now Blow Molded
Bayer Polymers has developed a blow molding technology that is putting new bounce into shock-absorbent seating for motorcycles, snowmobiles, tractors and off-road vehicles.