Hot Runners

Exploring the: Hot Runners Zone

93 Results for: Product

Sort by:
Published: 9/18/2019

Hot Runners: Family Mold Friendly Systems, Cylinders, Nozzles and Cooling Tech Featured
At K 2019, HRS’ FLEXflow will power a pair of family molds and the company will showcase new cylinders, hot runner nozzles and cooling technology.

Published: 9/10/2019

Tooling: Expanded Mold Base Range, New Hot Runner Brand
Hasco will feature and expanded range of mold bases at K 2019, as well as launch its own hot runner brand with new Single-Shot individual nozzle.

Published: 9/10/2019

Tooling: New Flat Die Nozzle and Cloud-Powered Mold Monitoring
Haidlmair Group will launch two new companies and two new products at K 2019, including a new iteration of its flat die unit (FDU) and a mold monitoring technology.

Published: 9/9/2019

Heating/Cooling: ‘World’s Smallest’ Cartridge Heater
Just 2 mm wide, this Turk+Hillinger cartridge is suited to small hot-runner nozzles.

Published: 8/6/2019

Hot Runners: System Targets Dust Reduction in PET Preform Molds
MHT and university researchers developed a new hot runner specifically for PET preforms that is said to greatly reduce dust formation and will launch at K 2019.

Published: 8/6/2019

Hot Runners: Multi-Tip Nozzle For Vertical Gating, Process Monitoring and LSR Cold Runner
At K 2019, Ewikon will unveil a new nozzle range for vertical multi gating, process monitoring tech and a cold runner for LSR molding.

Published: 6/11/2019

Tooling: Off-the-Shelf Conformal Cooling via Standardized Components
Ready-to-order conformally cooled cold-sprue and hot-drop bushings from Milacron’s DME business allow molders to reap the benefits of 3D printed cooling channels in key areas of the tool without the cost of one-off custom analysis, design and ...

Published: 4/23/2019

Hot Runners: Electric Pin-Movement Control for Large Sequentially Valve-Gated Parts
Initially introduced in 2010 for small-part molding, a new generation of electrically actuated valve gates targets large parts.

Published: 4/23/2019

Hot Runners: Need For Water Cooling of Actuators Eliminated
New cylinder design reduces heat exposure by minimizing surface contact and applying low heat conductivity insulation on support columns.

Published: 4/9/2019

Hot Runners: Range of Ready-to-Install Single Needle Valves Extended
Ready-to-connect system—including nozzle; all the hot runner and connection components; the clamping, frame and nozzle retainer plate; and also the standard parts—can be directly assembled to the fixed mold plate.