PET Processing - Extrusion

Exploring the: PET Processing - Extrusion Zone

95 Results for: Article

Sort by:
Published: 5/29/2012

Extruder Inspection & Vibration Analysis Detects Problems Early, Prevents Failures
Service is offered to all types of extrusion processors for all of types and makes of extruders and motors.

Published: 4/29/2012

Thrifty California Processor Dries PET with 'Waste' Heat
Southern California can be a challenging environment for manufacturers, not least because of concerns about the cost and availability of electrical power.

Published: 2/23/2012

Extrusion & Compounding at NPE: More Output, More Flexibility, Less Energy
There won't be many blown-film lines running, but there is still much in the way of innovation going on in extrusion and compounding.

Published: 2/21/2012

Now You Can Measure Pellet Moisture In the Hopper, in Real Time
Take the guesswork out of drying with new technology.

Published: 10/25/2011

'Dryer-less' PET Sheet System
Processing Technologies International (PTi), recently took the wraps off its “dryer-less” twin-screw PET sheet extrusion system at its headquarters in Aurora, Ill.

Published: 7/27/2011

Why—and How—to Baseline Your Extruder
If you don’t baseline your extruder, then how are you going to set realistic expectations for its performance? Here's how to get going.

Published: 7/27/2011

New Barrel Heater/Cooler Saves ‘Juice' to Run an Extruder
New, patent-pending design is said to reduce both radiant and convection heat losses.

Published: 6/27/2011

DAK to Buy Wellman’s PET Business
Move follows DAK purchase of Eastman's PET operation.

Published: 6/27/2011

Dead Screw Talking
There's a lot you can learn by conducting a post-mortum examination of your screw.

Published: 6/27/2011

Look Before You Leap: When Direct Extrusion Makes Sense
The process offers great opportunities to extrude a better product at less cost, but it’s not for everyone. The formulation, product mix, and anticipated volumes must be carefully assessed to determine whether DE is the preferred manufacturing...