Advanced Inspection of Bottles and Labels
NPE2024: Intravis shows new system for full label inspection on round, randomly oriented bottles; and redesigned bottle inspection system with more modular design.
New LabelWatcher 360° from Intravis inspects labels on randomly oriented bottles at up to 10 parts/sec. Source: Intravis
Among four new inspection systems from Intravis are two for blow molders that capture defects in bottles and labels. LabelWatcher 360° is new for 100% inspection of self-adhesive labels on randomly oriented bottles. This compact, standalone unit can be integrated into the production line at any point after the labeling machine. It provides full 360-degree inspection and also reads 1D/2D codes. The unit is designed to keep up with even the fastest labelers — up to 10 parts/second.
It’s designed especially for nonoriented products; special features accommodate different rotational positions. A new illumination concept is said to ensure the entire label is uniformly illuminated, so that defects can be reliably detected even at the label edges; and reflections are prevented, avoiding false rejects. A setup wizard enables fast setup of new products by any operator and eliminates the need for time-consuming image collection of different rotational positions.
The system uses six cameras. For oriented objects, one camera can inspect the neck opening for diameter and ovality, and check the sealing surface for nicks and scratches.
Intravis redesigned its SpotWatcher with a new look and more modular design. It inspects bottles for color, contour, opening, pinholes, burners and material contamination. Source: Intravis
Also on display is a redesigned SpotWatcher bottle inspection system with a new, more modular and more aesthetic design. It performs material defect inspection — checking the blank bottle sidewall for dark pinholes, burners and contamination — as well as color inspection (streak detection), contour inspection (flashes, webbing, handle folds) and opening inspection (diameter, ovality and excess material inside the neck).
Cloud storage provides data security. Optional features include long-term image memory and reject-rate monitoring.
Intravis also has new systems for inspecting caps and in-mold labels at NPE2024.
Related Content
-
Automation Evolution: From Robots to Work Cells, Solo Devices to Integrated Systems
Injection molding automation has progressed from devices to systems, from simplicity to more complex capabilities. The author traces this development through various levels of automation – all still available choices today – and analyzes the costs and capabilities for each level.
-
A Cost Saving Modular Approach to Resin Drying Automation
Whether implementing a moisture-sensing closed-loop system for a single dryer, or automating an entire plant, technology is available to take the guesswork and worry out of resin drying. Using a modular approach allows processors to start simple and build more capabilities over time.
-
An Automation 'First' for Non-Servo-Eject Trim Presses
Compact, flexible and configurable robotic system is said to be the first to enable thermoformers to fully automate product handling after a non-servo trim press.