Pressure Tester Checks Molds for Water Leaks
Globeius is offering the Mouldpro pressure tester for detecting water leaks within an injection mold’s cooling circuit.
Globeius Inc.’s Mouldpro pressure tester offers a portable, powerless means to quickly detect water leakage within a mold’s cooling circuits. Offering a manual means for testing, the pressure tester includes a built-in water tank, a connected hose and two valve handles to regulate pressure into and out of the system.
Globeius notes that the unit can test working pressures ranging from 0 to 870 psi and could be used for leak detection on other devices. The tester measures 190 by 530 by 305 mm (7.5 by 21 by 12"), with a tank volume of 12 L and water as a testing media. The output is a tapered ½" female BSPP (British standard pipe parallel) connection, and the maximum operating temperature is 50°C (122°F).
The Mouldpro pressure tester offers a manual means to check the cooling circuit of an injection mold for leaks.
Photo Credit: Globeius
Related Content
-
Why Shoulder Bolts Are Too Important to Ignore (Part 1)
These humble but essential fasteners used in injection molds are known by various names and used for a number of purposes.
-
Improve The Cooling Performance Of Your Molds
Need to figure out your mold-cooling energy requirements for the various polymers you run? What about sizing cooling circuits so they provide adequate cooling capacity? Learn the tricks of the trade here.
-
How to Mount an Injection Mold
Five industry pros with more than 200 years of combined molding experience provide step-by-step best practices on mounting a mold in a horizontal injection molding machine.
